Yanmar engine info

[webn237]

Hey guys!
I was wondering if anyone has a book or know where I can get a book for the 3 cylinder Yanmar from a JD F1145? Im getting the engine from one and would like to rebuild it. I found the spec sheet for the tractor but not the engine.
Any info would be great!
Thanks!


Here is a picture of the engine tag.

 

[Jtullis13]

Good question. The F1145 is a front mower unit I believe. I don't think Hoye has any information on this, but maybe try your local John Deere dealer? :confused3:

 

[HoyeTractor]

There is a listing on ebay for some F1145 engine parts that says it is a 3TNE78 but some listings also say 3TN75. Maybe it had 2 possible engines? The bore diameter should tell you which it has (78mm or 75mm).

 

[284 International]

John Deere Parts Catalog

It looks like both the 75mm bore and 78mm bore engines were used in those machines. Hoye has service manuals advertised for certain tractors that may contain engine rebuild information for similar or interchangeable engines.

 

[California]

John Deere Parts Catalog

It looks like both the 75mm bore and 78mm bore engines were used in those machines. Hoye has service manuals advertised for certain tractors that may contain engine rebuild information for similar or interchangeable engines.

284 International welcome home! We haven't seen you post here for a while. Anything new?

 

[284 International]

Thank you! For better or worse there is not much new; I still lurk about though!

 

[clemsonfor]

Were entering our slow period I see. Not as many new posts or discussions as the summer mowing and project season is coming to a close.

 

[bmaverick]

Hey guys!
I was wondering if anyone has a book or know where I can get a book for the 3 cylinder Yanmar from a JD F1145? Im getting the engine from one and would like to rebuild it. I found the spec sheet for the tractor but not the engine.
Any info would be great!
Thanks!


Here is a picture of the engine tag.View attachment 583433

Is this the one being converted to the transport and needing to upgrade to the turbo too? Sorry, I've been on a few different forums seeing your threads. Keep up the work. It would be cool to see how all this turns out.

 

[webn237]

Is this the one being converted to the transport and needing to upgrade to the turbo too? Sorry, I've been on a few different forums seeing your threads. Keep up the work. It would be cool to see how all this turns out.

Yes this is the one that needs the turbo lol. Thanks its going to be sweet when its done

 

[thepumpguysc]

Hoye or Fredricks..