J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,973
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
I would use the same diverter/selectorvalve I posted above.
Would this work ?
- Thread starter Biggreenavalanche
- Start date
- Views: 3081
I would use the same diverter/selectorvalve I posted above.
MtnViewRanch
Elite Member, Advertiser
- Joined
- Mar 19, 2005
- Messages
- 10,691
- Tractor
- Mahindra 7520, Mahindra 3215HST, Case 580 extendahoe, Case 310 dozer, Parsons trencher, Cat D6,
In my opinion, this is the best place to mount the electric diverter.
Of course it varies tractor to tractor, but for your 4035, this is where I would mount it. Clean, easy and the diverter stays with the loader
Just my :2cents:
Of course it varies tractor to tractor, but for your 4035, this is where I would mount it. Clean, easy and the diverter stays with the loader
Just my :2cents:
OP
Biggreenavalanche
Gold Member
VERY nice and clean...'zactly what I'm looking for...your kit ?
OP
Biggreenavalanche
Gold Member
J_J, /Pine, Mtview,
Thank you all very much for the education and patience...
Rich
Thank you all very much for the education and patience...
Rich
MtnViewRanch
Elite Member, Advertiser
- Joined
- Mar 19, 2005
- Messages
- 10,691
- Tractor
- Mahindra 7520, Mahindra 3215HST, Case 580 extendahoe, Case 310 dozer, Parsons trencher, Cat D6,
Yes, I supply everything except the actual diverter valve mount. No it is not a "kit". I very much dislike hoses that are the wrong length and generic valve mounts. What I do is ship the customer the diverter valve, the control grip, and front QDs with mount. Customer gets those installed, measures for hoses. (using sample 10' length of hose that I supply) Gets me the hose lengths and type-size of ends needed to get everything plumbed in. Hoses get made and shipped within 2 days. Customer ends up with custom fit unit for their tractor.
All for $535 + shipping costs.
OP
Biggreenavalanche
Gold Member
THAT is the way to do biz ! Soon as I get the $ I'll be in touch
/pine
Super Star Member
- Joined
- Mar 4, 2009
- Messages
- 15,763
Big_green...working with tractor etc. hydraulics can be a little confusing when you start working with all the fittings (hose ends, valve/cylinder ports, QD's etc.)...It will help you to learn size and type nomenclature for the various fittings...i.e., JIC (flare) NTP (pipe thread) SAE or ORB etc....etc.
On the left of this page Surplus Center - Tech Help there are some thread ID links to give you a heads up...
Buying fittings online is much cheaper than paying retail at places like TSC or NAPPA etc...
Good luck...
On the left of this page Surplus Center - Tech Help there are some thread ID links to give you a heads up...
Buying fittings online is much cheaper than paying retail at places like TSC or NAPPA etc...
Good luck...
OP
Biggreenavalanche
Gold Member
/Pine, thanks...I'll go to that tech help link and learn some more ! Thanks yet again !
Rich
Rich
