woods bush hogging tips.

BrettW · Dec 12, 2004

I want to start bush hogging in my woods just to make it walkable and later keep it looking nicer than brush and trees. Could use lots of safety tips. Dont want to hit stumps, rocks, or holes that would flip me.
That would really ruin my day. thanks, brett w

Mith · Dec 12, 2004

if you have a FEL ive heard people say to put it a few inches off the ground so it will 'feel' out stumps and rocks hidden in weeds and of cource keep your eyes out
also you could walk all over it and kick about and put in posts were big rocks and stumps are so you can miss them with the hog
hope it helps
mith

RoyJackson · Dec 12, 2004

If possible, walk the area first.
I'm one of those guys who strongly suggests using the loader bucket as low as possible to "find" stumps and such. Now, the loader isn't going to find holes and ruts so go slow! Going slow will give you time to react if one of your wheels drops into a rut.

I also suggest you set your cutter as high as you can for the first passes over any "unknown territory". You can cut lower the next time you cut if you don't let it get too high in the interim.
Another thing is to do your initial cutting as early in the season as possible....before any growth gets going in the Spring.

You'll also have a tendency to watch the ground as you're passing and the cutter. Well, don't forget those low hanging branches that'll slap you in the face.

Again, I'll repeat it... go slow!

Henro · Dec 12, 2004

In addition to following the advice already given above, you might want to consider some kind of guard that will protect you from whatever the rotary cutter might throw your way.

Here's a previous thread... /forums/images/graemlins/smile.gif

Birdhunter1 · Dec 14, 2004

Go around the outside of your propery clearing brush out and then catch the wind right and burn it. Should go quick and you don't have to worry about dropping into a whole or hitting a stump then.

stuart · Dec 16, 2004

Brett: I walk the area I am going to HOG and put red flags on anything that might cause a problem especially any stumps or rocks I have not removed yet.

penokee · Dec 28, 2004

Brett
Don't allow anyone or any pet to be on the job site. Objects can be thrown considerable distance at high velocity. A few situations that I am aware of or have heard of in this area: Rock thrown into a tree and came back to hit the oerator in the face, breaking his nose and knocking him unconscious. A piece of barbed wire was driven into the chest of an onlooker, and a picture window was broken 200+ feet away after being hit with a rock. My brother-in-law ran a large rotary cutter mounted on a Grader and had the broken nose. As I get older, I have to keep reminding myself before every job, "Take it slow and be Safe".
penokee /forums/images/graemlins/smile.gif

KiotiJohn · Jan 16, 2005

Make sure you have the front of the hog a little lower than the rear to help avoid objects coming out the front and hitting you/tractor.
If cutting higher the first time, don't come up too high as whatever you hit will more easily be thrown toward you.
When keeping the FEL down to "feel" for objects, remember that if it hits something, you may do damage. So follow the advice given, to GO SLOW. Once you have it all cleared up, you can mow faster, but still always proceed with caution. Things just magically seem to appear in places where you thought it was clean. John

virgil · Jan 18, 2005

sometimes you would be money ahead hiring the first brush hogging done. Let someone else tear up their stuff first, then go in behind the hired work and keep it cut.

virgil · Jan 18, 2005

bee nest = ABANDON SHIP

rdbrumfield · Feb 23, 2005

This might seem a bit extreme to most folks, but I have used a full face motorcycle helmet at times when the hornet problem has been bad. Also great protection in the limbs and briars.

GerardC · Feb 24, 2005

( This might seem a bit extreme to most folks, but I have used a full face motorcycle helmet at times....)

Not at all. (See attachment) Been using it for years. Gerard

rdbrumfield · Feb 25, 2005

Nice helmet. The other thing is that they are great in the cold too. I do get some laughs from some folks when operating dozers in the winter, wind blowing rain sideways or snowing. They really help, and make one heck of a hardhat. I would recommend one for any operator. I have been hit by small rocks when mowing hay when hitting mole hills. The helmet sure helps me there too.

GerardC · Feb 25, 2005

( The other thing is that they are great in the cold too. )

Sure are. Mine has vents in the chin and forehead. Great for keeping the fog off the shield. Gerard

jmc · Feb 25, 2005

Brett,

Some great advice posted above. I learned when bush hogging high, dense stuff to use 2 wheel drive. 4 wheel drive may climb up on obstacles before you have a chance to react.

One of these days I am going to modify the bottom of my bush hog side plates so they don't skin the trees when I get too close.

John

BrettW · Mar 26, 2005

thanks to all,
I've been too busy to get serious about it yet, but I still have plans to try it. There is so much junk in the way that It would be a major effort to get in there and start working. Right now it is garden and firewood and a barn that I need to work on. Any barn building tips? thanks, bw

kenmac · Mar 27, 2005

yellow jackets got me for the 1 st. time last year at the end of the season.they don't like bush hogs on top of their house at all and will let you know it !