Winch Question

   / Winch Question #11  
I have an older Yale chain come-a-long. It isn't very long. It is heavy. But it has a lot of pulling power. One could probably put a 100 foot chain into it if one wanted though, if one had good high tensile chain.

But, I certainly like the winch on my Blazer. I have chained the Blazer to a tree before... Was that pulling the tractor out of a hole?
 
   / Winch Question
  • Thread Starter
#12  
Yes. See picture at beginning of thread
 
   / Winch Question #13  
My project for this weekend is to build a 3PTH winch. It will be electric with spot for one or two batteries. Should weight in around 300 lbs. If the Op was using the box blade as a counter weight, a 3PTH winch would be a good option. If you got stuck using the box blade, then he needs another option.

If you are to carry a come-a-long, then you will need a large tool box for it and some chain. You should be able to install an ATV winch up front, IE 2500 lb with a pullyblock and tree saver strap, should get you our of most situations where you are by yourself miles from assistance.
 

Tractor & Equipment Auctions

2012 OVERLAN KILL TRAILER (A53843)
2012 OVERLAN KILL...
UNUSED RAYTREE RMT 48 48" HYD TRENCHER (A57193)
UNUSED RAYTREE RMT...
2013 CATERPILLAR CP44 PADFOOT ROLLER (A52707)
2013 CATERPILLAR...
2014 Ford F-250 4x4 Ext. Cab 8ft. Flatbed Truck (A55852)
2014 Ford F-250...
2025 GIYI GY-X39F Hydraulic Trencher Skid Steer Attachment (A53421)
2025 GIYI GY-X39F...
2 windsor 351 inboard motors w/transmissions shafts rutters and props (A53424)
2 windsor 351...
 
Top