WICKED Toothbar will Transform Your Bucket

[EverythingAttachments]

Here is my wicked tooth bar.

Been using it lately as an ice 'scarifier'. Some was wondering on how the wicked tooth bar would work for that, and purdy darned good it does....
It will shave grooves in the ice and the shavings will freeze back to the ice creating more traction. Works best for me on a 'backd drag' with just a little downward pressure.
View attachment 728738

That's great to hear. Yeah, I think many are unaware of just how versatile the Wicked Toothbar is!! Thanks for the business and for sharing such awesome first hand feedback. #EAcustomersROCK
Travis

 

[EverythingAttachments]

Some more Wicked good feedback from the reviews section..
Travis

 

[JohnnyMX]

I for one would like to see Ted make a video where he uses the toothbar to make pulled pork at your next company event. Just saying...

 

[EverythingAttachments]

I for one would like to see Ted make a video where he uses the toothbar to make pulled pork at your next company event. Just saying...

Hahaha, I would like to witness that in person! #MakinMeHungry
Travis

 

[EverythingAttachments]

Each Wicked Toothbar is custom, based on these 3 measurements from your bucket:

1. Exact inside bucket width?
2. Overall width of bucket, which includes the welded on edge?
3. Thickness of the welded, lower cutting edge?

I made this video to explain the measurements..

Also,
We've ran into a couple of buckets by different manufacturers with sides which taper in as you go into the bucket. If your bucket gets narrower like this, take your inside measurement from nine inches back inside the bucket. Call for clarification if needed.
Travis

 

[EverythingAttachments]

One of my favorites..
Travis

 

[EverythingAttachments]

Material most definitely matters!
Travis

(click to enlarge)

 

[EverythingAttachments]

Dave from NC left us a nice Wicked Toothbar review yesterday, and it's great to see he's following along here on TBN.. #ThanksDave #EAcustomersROCK
Travis

"I am very happy with the 72" "custom" Wicked Tooth Bar. I sent all the require measurements to fit the tooth bar inside my bucket. Bolted right up! My main use will be for further clearing two thirds of my 14.76 acre property. Mainly leveling soil and grubbing many trees, bushes, etc. from my property. Based on my usage so for, the tooth bar is far superior than just the OEM FEL bucket. The fit and finish is very good. I texted Travis a picture of the tooth bar on my Kioti DK4710se bucket. Please feel free to use that picture and this review on Tractorbynet.com (recent threads as of 1.19.22) or otherwise. Great product."

 

[EverythingAttachments]

When the first email I read goes like this, it's gonna be a good day at EA!!
Travis

"I purchased a Wicked Toothbar from Everything Attachments a little while back and wanted to thank you guys for an excellent product and customer service.

After looking at other tooth bars it was clear yours was hands down the best tooth bar available. The way it mounts to the bucket, tooth design and the construction being completely of AR 450 nothing compared to it. After mounting the tooth bar to my loader and using it even just for a small amount of time, it GREATLY improved bucket performance....even using it for 'scarifying' ice on the driveway and shop yard.

Thanks again Everything Attachments"
-Wade

 

[EverythingAttachments]

A little info about Hardox 450.. #MaterialMatters
Travis

 

[EverythingAttachments]

If you guys like seeing the build processes, and unpainted Wickedness, along with good fun all day, come on over and check out the Everything Attachments Channel Group on facebook. You can see the content, even if you aren't a fan or member of facebook.
Travis

I just took and posted some fresh, Wicked pics from the factory..
Travis

 

[EverythingAttachments]

*PUBLIC SERVICE ANNOUNCEMENT*

Keep your body away from WICKED teeth!!
Oh, and don't drink Coke around them, either..
Travis

 

[Plant 175]

Do you need to measure the bucket on a B2601 Kubota or are they all running about the same. I have my tractor at my property and won’t be there for another 6 weeks

 

[EverythingAttachments]

Do you need to measure the bucket on a B2601 Kubota or are they all running about the same. I have my tractor at my property and won’t be there for another 6 weeks

We request measurements from each bucket, due to inconsistencies among manufacturers. So, each Wicked Toothbar is custom for the intended bucket, and has been shipping within 4ish weeks.

If you want to trust the consistency, the last customer submitted measurements for a 54" B2601 bucket:
52 inches inside
54 3/8 inches overall
3/8 inch thick edge
Travis

 

[Username Taken]

We request measurements from each bucket, due to inconsistencies among manufacturers. So, each Wicked Toothbar is custom for the intended bucket, and has been shipping within 4ish weeks.

If you want to trust the consistency, the last customer submitted measurements for a 54" B2601 bucket:
52 inches inside
54 3/8 inches overall
3/8 inch thick edge
Travis

View attachment 731155

I'm thinking about ordering a Wicked Toothbar for my Kioti CX2510h. I would like it delivered along with my other order this coming June. I hope it wouldn't be a pain adding onto an existing order.

The bucket on my KL2510 Loader is just downright weird. Not only are the sides of the bucket sort of Ski Jump shaped, concave if you will, but Kioti decided to put a big honkin' brace on the bottom outside edge. So the ears, I think, would have to be longer than usual. I think. I really don't want to have to punch through an extra 10mm (??) of hardened steel if I don't have to.

Next time you build one for a Kioti KL2510 loader, maybe you could let me know somehow or another. In here would be fine.

Thanks
R

 

[EverythingAttachments]

I'm thinking about ordering a Wicked Toothbar for my Kioti CX2510h. I would like it delivered along with my other order this coming June. I hope it wouldn't be a pain adding onto an existing order.

The bucket on my KL2510 Loader is just downright weird. Not only are the sides of the bucket sort of Ski Jump shaped, concave if you will, but Kioti decided to put a big honkin' brace on the bottom outside edge. So the ears, I think, would have to be longer than usual. I think. I really don't want to have to punch through an extra 10mm (??) of hardened steel if I don't have to.

Next time you build one for a Kioti KL2510 loader, maybe you could let me know somehow or another. In here would be fine.

Thanks
R

It definitely wouldn't be a pain to add it.

I've sold quite a few for Kioti buckets with those weird shapes, and haven't heard of an issue.

This may help. For installation, the distance from the tip of the cutting edge to the center of the bolt can be up to about 8.5".
Travis

 

[Username Taken]

Thanks Travis. 8-1/2" sounds right. I ordered my Grapple and WR Long kit from you. I guess the lead time on the toothbar is about 4 weeks now? Not that I'm gonna wait until the last minute.

I have the inside measurement, 49-5/16" but not the other measurements and the bucket is 1,400 miles away and in a very, very cold place right now. I had the other measurements but can't find them. dang it

Maybe I can get somebody to measure what you need. Whatever that is

Let me know.

 

[EverythingAttachments]

Thanks Travis. 8-1/2" sounds right. I ordered my Grapple and WR Long kit from you. I guess the lead time on the toothbar is about 4 weeks now? Not that I'm gonna wait until the last minute.

I have the inside measurement, 49-5/16" but not the other measurements and the bucket is 1,400 miles away and in a very, very cold place right now. I had the other measurements but can't find them. dang it

Maybe I can get somebody to measure what you need. Whatever that is

Let me know.

Yeah, around 4wks build time here lately.

The inside measurement is the most crucial. As long as it is correct, you could ballpark the overall at a couple inches more and be safe. 3rd question is plate thickness of the welded on edge, and that's not usually any thicker than 1/2".

Because of not knowing the exact overall, it could stick out a little further than the bucket edge on either side, instead of being perfectly matched, as shown here, but that wouldn't be a biggie for most..
Travis

 

[newbury]

What's the approximate weight for a 72" (for my M4700)?

 

[Username Taken]

Yeah, around 4wks build time here lately.

The inside measurement is the most crucial. As long as it is correct, you could ballpark the overall at a couple inches more and be safe. 3rd question is plate thickness of the welded on edge, and that's not usually any thicker than 1/2".

Because of not knowing the exact overall, it could stick out a little further than the bucket edge on either side, instead of being perfectly matched, as shown here, but that wouldn't be a biggie for most..
Travis


View attachment 731193

Thanks, Ted. I'll be letting you know come closer to me being back on the Farm. Right now, I'm stuck in Florida and it's wall to wall butts. Cellulite butts. Tired of it. I'd move permanently but I think the cold would kill me. It's single digits up on the Farm right now.

Might have to get forks, too.

Stay warm

R