What tool did Santa bring you?
- Thread starter dragoneggs
- Start date
- Views: 10391
Big Chief
Silver Member
Tapes measures, headlight flash lights, Milwaukee drill bit kit and sheet rock knife kit from the depot.
4570Man
Super Star Member
- Joined
- Apr 7, 2015
- Messages
- 18,942
- Location
- Crossville, TN
- Tractor
- Kubota M59, Kubota L3800, Grasshopper 428D, Topkick dump truck, 3500 dump truck, 10 ton trailer, more lighter trailers.
Mini bolt cutters would be a stretch. It did it but it’s not really made for that. It would be great for cutting fence especially if there’s a lot to do.
Jchonline
Elite Member
- Joined
- Feb 19, 2018
- Messages
- 3,089
- Location
- Red Feather Lakes, CO
- Tractor
- Kubota L6060, KX040-4, M7060, X1100C, M62(S)
Got the new Milwaukee battery chainsaw. I will get it dirty just after the new year, and we will see how it works with the Stihls.
OP
dragoneggs
Super Star Member
- Joined
- Jun 9, 2013
- Messages
- 14,548
- Location
- Seabeck, Washington
- Tractor
- Kubota BX-25D, Kubota Z122RKW-42
Picture?
LouNY
Super Star Member
- Joined
- Jul 4, 2015
- Messages
- 14,180
- Location
- Greenwich, NY
- Tractor
- Branson 8050, IH 574, Oliver 1550 Diesel Utility (traded in on Branson) NH 8160. Kioti CK2620SECH
My wife got me a new jumper pack, and a smart switch,
it's a 3 outlet pigtail that I should be able to plug block heaters or other things
into and turn on with my smart phone or set a schedule for, havnen't messed much with it yet.
it's a 3 outlet pigtail that I should be able to plug block heaters or other things
into and turn on with my smart phone or set a schedule for, havnen't messed much with it yet.
k0ua
Epic Contributor
A friend dropped by with his new AA 55 Zoom antenna analyiser. I fell in love with it almost instantly. I told the wife I really needed one. She said Merry Christmas honey.
Google Image Result for https://rigexpert.com/wp-content/uploads/2 16/1 /AA-55ZOOM_rgb.jpg
Google Image Result for https://rigexpert.com/wp-content/uploads/2 16/1 /AA-55ZOOM_rgb.jpg
Thomas
Epic Contributor
- Joined
- Apr 6, 2000
- Messages
- 31,679
- Location
- Lebanon,NH.
- Tractor
- Kubota B2650HSD w/Frontloader & CC LTX1046 & Craftman T2200 lawn mower.
oosik
Thomas - every spring I thin my stands of young Ponderosa pines. Usually around 900 small trees. They are 6" in diameter or less on the base. I used my larger Stihl chain saw( MS270 ) with a 20" bar. I found that this situation became dangerous. As the day progressed, I would tire. My arms droop. Finally, the tip of the chain saw would make contact with my boots. A REALLY bad situation.
Now I do the same job with my new, lighter, shorter Stihl MS192 and a 12 inch bar. Cuts just as fast, I might have to bend over a tad more, my toes are now in the "safe zone".
....................................
Also facing what you wrote about...no good..not good at all.
The older I get I finding out I am more comfort/safe than speed.
Thomas - every spring I thin my stands of young Ponderosa pines. Usually around 900 small trees. They are 6" in diameter or less on the base. I used my larger Stihl chain saw( MS270 ) with a 20" bar. I found that this situation became dangerous. As the day progressed, I would tire. My arms droop. Finally, the tip of the chain saw would make contact with my boots. A REALLY bad situation.
Now I do the same job with my new, lighter, shorter Stihl MS192 and a 12 inch bar. Cuts just as fast, I might have to bend over a tad more, my toes are now in the "safe zone".
....................................
Also facing what you wrote about...no good..not good at all.
The older I get I finding out I am more comfort/safe than speed.
OP
dragoneggs
Super Star Member
- Joined
- Jun 9, 2013
- Messages
- 14,548
- Location
- Seabeck, Washington
- Tractor
- Kubota BX-25D, Kubota Z122RKW-42
James, I got part way through a youtube video on this thing and I still don't know what I would ever do with it but I can tell if I did, I might be dancing too! :confused3: :cool2:
