What is this item?
- Thread starter John Fitzgerald
- Start date
- Views: 3834
![526691246[1].jpg](/forums/data/attachments/458/458645-1b3653a2c06019dfb14eeb6539d02d5f.jpg)
Kenneth in Texas
Gold Member
- Joined
- Dec 16, 2008
- Messages
- 470
- Location
- Pretty good ways from DFW, Texas
- Tractor
- Kubota L2800 4wd, FEL
looks like some sort of tie down but could be wrong
Valve? spring compressor.
I don't think that is right, but it is what popped into my mind. I've seen that tool in several old farm shops, and almost feel I've used one, but it was so long ago I can't remember.
Bruce
I don't think that is right, but it is what popped into my mind. I've seen that tool in several old farm shops, and almost feel I've used one, but it was so long ago I can't remember.
Bruce
Last edited:
Wagtail
Super Star Member
- Joined
- Jan 15, 2013
- Messages
- 12,625
- Location
- St Helens, Tasmania, Australia
- Tractor
- JD 4105 / JD Z355E (48" deck)
A part of a scale is what I'm thinking.
Almost an hour looking with no luck. Very frustrating. My mind recognized the image at once, but lost the caption. 
One of the "benefits" of getting old. You have to delete memory in order to make room for new downloads.
Bruce
One of the "benefits" of getting old. You have to delete memory in order to make room for new downloads.
Bruce
Egon
Epic Contributor
Peavey.
Last edited:
Wagtail
Super Star Member
- Joined
- Jan 15, 2013
- Messages
- 12,625
- Location
- St Helens, Tasmania, Australia
- Tractor
- JD 4105 / JD Z355E (48" deck)
What do you mean? :confused3:
----------------------
Never mind... found it. A logging tool.
RandyT
Elite Member
The was my first though also. the hook end hooks onto something and the oval hole is were the valve stem goes to compress the spring to remove the retainers on an OHV engine.
1965
Silver Member
My guess is it is a chain tensioner like you see on transports, feed the chain through the hole and insert the hook into a link and pull the handle down.
Egon
Epic Contributor
Put a wooden handle in the hole.