weld p0rn

[schmism]

lets see your best welding pics... (they dont have to be your own)

hears my entry to get us started

and of course like all p0rn.. .theres bad also... so dont be afraid to post the worst also... you know.. the bublegum, bird dropping, glue gun pics also

oh extra credit if it comes with detials about what was used.

the above was done with a MM251 (mig)

 

[MrJimi]

Thats not fair, you were born with a welder in your hand, That is great, how much for lessons
Here is my first attempt at welding two cans together for the first time and it will be better next time
I used a 220 volt Hobart Handler 120 with .023 wire and a 75/25 mix for gas

welded cans and yes, it's a small picture

 

[dbdartman]

Here's a few shots of the "torque boxes" I installed last week on my brother's 69 Coronet 500 wagon. They reinforce the front leaf spring mount area, tying the mount into the frame rail & rocker pinch weld. Weld was made with a Lincoln Pac-10 110v wire feed with flux core wire.

If you want REAL "weld p0rn", nextpic is a tool I made, in about 5 minutes, to remove the heater hose nipple from the water pump housing on a big block Mopar engine. This was tig welded.

The ultimate "kinky weld p0rn": Home made headers. Again, tig welded.