Loader weld on brackets for quick attach buckets

[megaboz]

I've been searching but not with much luck, but I know there was a person/company that made and sold brackets that could be welded to FEL buckets (and other things) that could allow you to use your quick attach that is on like a 2520 FEL.

Anyway, I can't seem to find the link. If someone would have it please post it for me.

Thank you.

 

[madmax12]

Do u mean everythingattachments.com?

 

[Willl]

The 'hook and pin' like I have on the back of this ?

If so, you get them straight from Deere.
(hook #W43359 pin #W47211)

 

[swick1]

Artillian makes subassemblies welded up for the left and right sides

 

[megaboz]

Well artillian is close, but what I was looking for was the kit that would turn a pin on fel into a quick attach fel. At least I could find the adapter that did that.

 

[Willl]

Like this ?, JD QH to skid steer QH.

Joanne's Pot Racks & Washburn's Industrial & Ag Attachments Skid steer adapter to fit John Deere300 &400 quicktach or quick attach loader

 

[megaboz]

Like this ?, JD QH to skid steer QH.

Joanne's Pot Racks & Washburn's Industrial & Ag Attachments Skid steer adapter to fit John Deere300 &400 quicktach or quick attach loader

No what I am trying to do is convert an old FEL that doesn't have the quick attach to the quick attach style on the current JD tractors. I'm trying to convert the tractor as well as the current bucket to the JD quick attach.

BTW, I really appreciate the help so far though.

 

[Zebrafive]

What model loader do you have?

 

[JoeBuyer]

I think this is what you are looking for. See listing starting on page 14. Pick your model number from the first link and call everythingattachments (second link is to the ATI adapter) and see if they can get that model.

http://www.preseeder.com/PDF/AttachProductList2010.pdf

http://www.everythingattachments.co...k-Attach-p/ati-hitch-tachall-quick-attach.htm

******* Sorry, just re read your post. You were looking to use the JD quick attach, not skid steer quick attach *******

 

[C-Range]

Hey guys,

Someone mentioned this thread to me in case I could be of help.

Thanks for the mention Swick.

Megaboz, as Zebrafive mentions, what model loader are you working with? It matters.