dieselscout80
Veteran Member
Being a 2016 does it have to use DEF?
Videos: 2016 Toolcat 5600 at work, mowing, tree stump, plowing, etc...
- Thread starter npartist
- Start date
- Views: 23300
ruffdog
Super Star Member
- Joined
- Dec 31, 2011
- Messages
- 10,755
- Location
- southern wisconsin
- Tractor
- Bobcat Toolcat 5610G, Deere X744, Cub Cadet IH 982
No DEF in the Toolcats.
dieselscout80
Veteran Member
What emissions equipment/systems do they have?
ruffdog
Super Star Member
- Joined
- Dec 31, 2011
- Messages
- 10,755
- Location
- southern wisconsin
- Tractor
- Bobcat Toolcat 5610G, Deere X744, Cub Cadet IH 982
With DOC they use EGR.
overview
I just had to run the toolcat indoors so I could weld a receiver hitch on my ssqa>3pt adaptor. It was a cold start and I just needed to raise the lift arm and I'm amazed that it hardly smells at all. No smoke and no burning eyes. Nice.
Here's a used buying guide and history of changes for series and model years. This includes major changes from each series (A thru G series) and common things to look for when buying a used toolcat 5600. I mispoke at the 1:11 min mark saying the older ones have independent front suspension, they do indeed have a solid axle (like my chart shows) but up front they have coil springs and links to locate the axles vs the leaf springs in the rear.
Last edited:
Hay Dude
Super Star Member
- Joined
- Aug 28, 2012
- Messages
- 19,068
- Location
- A Hay Field along the PA/DE border
- Tractor
- Challenger MT655E, Massey Ferguson 7495, Challenger MT535B, Krone 4x4 XC baler, (2) Kubota ZD331’s, 2020 Ram 5500 Cummins 4x4, IH 7500 4x4 dump truck, Kaufman 35’ tandem 19 ton trailer, Deere CX-15, Pottinger Hay mowers
Great video
Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 12,905
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
Hay Dude
Super Star Member
- Joined
- Aug 28, 2012
- Messages
- 19,068
- Location
- A Hay Field along the PA/DE border
- Tractor
- Challenger MT655E, Massey Ferguson 7495, Challenger MT535B, Krone 4x4 XC baler, (2) Kubota ZD331’s, 2020 Ram 5500 Cummins 4x4, IH 7500 4x4 dump truck, Kaufman 35’ tandem 19 ton trailer, Deere CX-15, Pottinger Hay mowers
Nate, another great video!
I have a plow mounted on my M126x and equipped it with a snow foil. You should try one. They are an inexpensive way to keep the windshield clear and the snow rolling even better.
My Western plow on my truck has one, too. Love em for powdery snow
I have a plow mounted on my M126x and equipped it with a snow foil. You should try one. They are an inexpensive way to keep the windshield clear and the snow rolling even better.
My Western plow on my truck has one, too. Love em for powdery snow
Attachments
Oh man, thats a serious tractor...can tell by 3 steps to just get in!
yeah i have thought about getting a rubber strip to bolt on the top of the plow. Probably should get around to doing it. Plow already has mounting holes. Maybe that will be another Nater Tater video! :cool2: