V2203 oil filter?

   / V2203 oil filter? #1  

nepa

Silver Member
Joined
May 31, 2013
Messages
144
Location
Forest City, PA
Tractor
Mitsubishi 180D, Jinma 284 sold, Kubota BX2660, IH Cub, Case 580CK, Minneapolis Moline 4 Star (sold), TYM 574, Furukawa FX-040
I have an obscure older excavator that no one can look up the oil filter. It has a Kubota V2203 engine. The filter on the unit has no markings. The filter measures about 3 inches in diameter and is about 3 inches long. Can anyone give me a part number? Thanks much.
 
   / V2203 oil filter? #2  
Same motor as a 743 bobcat , try that
 
   / V2203 oil filter?
  • Thread Starter
#4  
Thanks for the help. I went to my local napa this morning. Gave me a 1068. Threads and gasket fit fine, everything good. But the 1068 was noticeably larger in both length and diameter than what was on the engine.
 
   / V2203 oil filter? #5  
That 3/4 x 16 thread is one of the very most common filters out there.
Many different lengths and a smaller diameter as well.
Guessing the 1058 is the NAPA number-for the smaller diameter,try 1348 for shorter length and 1516 for longer.
Good Luck!
 

Tractor & Equipment Auctions

2015 MACK GU713 (A50854)
2015 MACK GU713...
2017 Ram 4500 Bucket Truck (A51039)
2017 Ram 4500...
BBQ Pit (A50860)
BBQ Pit (A50860)
Vacuworx MC3B Vacuum Lifter (A50860)
Vacuworx MC3B...
2018 HINO 268 26FT BOX TRUCK (A51222)
2018 HINO 268 26FT...
2022 Down2Earth 82in x 36ft Two-Car Hauler (A51039)
2022 Down2Earth...
 
Top