V2203 oil filter?

   / V2203 oil filter? #1  

nepa

Silver Member
Joined
May 31, 2013
Messages
147
Location
Forest City, PA
Tractor
Mitsubishi 180D, Jinma 284 sold, Kubota BX2660, IH Cub, Case 580CK, Minneapolis Moline 4 Star (sold), TYM 574, Furukawa FX-040
I have an obscure older excavator that no one can look up the oil filter. It has a Kubota V2203 engine. The filter on the unit has no markings. The filter measures about 3 inches in diameter and is about 3 inches long. Can anyone give me a part number? Thanks much.
 
   / V2203 oil filter? #2  
Same motor as a 743 bobcat , try that
 
   / V2203 oil filter?
  • Thread Starter
#4  
Thanks for the help. I went to my local napa this morning. Gave me a 1068. Threads and gasket fit fine, everything good. But the 1068 was noticeably larger in both length and diameter than what was on the engine.
 
   / V2203 oil filter? #5  
That 3/4 x 16 thread is one of the very most common filters out there.
Many different lengths and a smaller diameter as well.
Guessing the 1058 is the NAPA number-for the smaller diameter,try 1348 for shorter length and 1516 for longer.
Good Luck!
 

Tractor & Equipment Auctions

2022 John Deere 325G Skid Steer (A50657)
2022 John Deere...
Chevrolet C8500 Flat Bed with a Moffet Kit (A51039)
Chevrolet C8500...
8 Ft Fork Extensions (A50322)
8 Ft Fork...
PENDING SELLER CONFIRMATIONS (A51222)
PENDING SELLER...
10x16.5 Tire Assembly (A51039)
10x16.5 Tire...
Unused 2025 40ft. Texas Pride FT835524KGN 13 Ton T/A Gooseneck Flatbed Trailer (A49346)
Unused 2025 40ft...
 
Top