chrismac
Silver Member
So I ended up gambling on the seals ending in 400, they happen to be £30 each rather than £130 both plus vat totals would have been £80 or £300 plus, the size given was incorrect and the OD is 88mm, I got the new seal in, it was very tight on the shoulder where the old seal sat against and needed quite a bit of persuasion, probably slightly indenting the edge of the steel part of the new seal,
I made replacement gaskets by gently tapping round the casing with a small ball peen hammer,
Untitled by chrismac2012, on Flickr
Untitled by chrismac2012, on Flickr
Untitled by chrismac2012, on Flickr
Untitled by chrismac2012, on Flickr
Then we have the other side with the diff lock mechanism, pretty straight forward how it works,
Untitled by chrismac2012, on Flickr
The leaver just pulls the internals pushing the fork out engaging the rectangular dogs,
Untitled by chrismac2012, on Flickr
Some strange marks in the internal bearing surface, the shaft has matching marks, no steps or roughness can be found so not sure what has caused it,
Untitled by chrismac2012, on Flickr
Untitled by chrismac2012, on Flickr
Some damage can be seen on the other side of the diff lock mechanism
Untitled by chrismac2012, on Flickr
So over the weekend I'll get it reassembled and see if the casings hold the oil with no leaks.
Chris
I made replacement gaskets by gently tapping round the casing with a small ball peen hammer,
Untitled by chrismac2012, on Flickr
Untitled by chrismac2012, on Flickr
Untitled by chrismac2012, on Flickr
Untitled by chrismac2012, on Flickr
Then we have the other side with the diff lock mechanism, pretty straight forward how it works,
Untitled by chrismac2012, on Flickr
The leaver just pulls the internals pushing the fork out engaging the rectangular dogs,
Untitled by chrismac2012, on Flickr
Some strange marks in the internal bearing surface, the shaft has matching marks, no steps or roughness can be found so not sure what has caused it,
Untitled by chrismac2012, on Flickr
Untitled by chrismac2012, on Flickr
Some damage can be seen on the other side of the diff lock mechanism
Untitled by chrismac2012, on Flickr
So over the weekend I'll get it reassembled and see if the casings hold the oil with no leaks.
Chris