Tractor caddy recommendation

[Aggie66]

I have a Kabota MX 5400 and have a need for a caddy that I’m believing will fit between the two roll Bar post. Anyone have a recommendation on a caddy that has worked well for them. I plan on carrying just typical things a chainsaw a Gerry jug wrenches chains stuff like that. Any recommendations are appreciated.

 

[bmaverick]

You can make your own from a metal toolbox and parts from Menards.

Large one,

smaller one,

If it fits on my Yanmar, it should fit on your Japan made Kubota too!

 

[bmaverick]

others on the web, for several hundred dollars are . . .

 

[bmaverick]

You can make one for the 3-point lift too out of an IBC tote cage on the cheap.
Either free or under $30 off Craigs List in my area for a 250-gallon tote.

Then cut it to the height you want or cut out one side, or whatever . . .

Even a plastic 55-gallon barrel for $15 off Craigs List can be a nice carry all.
Use round PVC tubes mounted inside to hold things in place.

 

[bmaverick]

more ideas to kick around members have done over the years here,

 

[bmaverick]

If you want a fancy 3-point cart on wheels with a carry-all,

This can be bought for several hundred dollars or build it for about $400 with all the parts from Harbor Freight.

 

[oosik]

I looked for something like has been shown here. Then I realized that a whole lot of what I do requires the hauling of large items - large rocks, large chunks of pine tree trunk. As well as small tools also. I decided to build a farm wagon. Bed is 8' x 12' and will carry 20K pounds. It's got a Horst 20K frame - 1 1/4 T&G plywood deck. AND - I'm finally pretty good at backing it up.