Tracking mud into shop....what to do?

   / Tracking mud into shop....what to do? #1  

v8only

Silver Member
Joined
May 27, 2012
Messages
225
Location
Mb
Tractor
1988 John Deere 755
After a few hours of tilling my turf tires get packed full of clay, so I do some heavy turns in the grass to get as much off as possible then I head out to the paved road and spin them as clean as possible but I still track a ton of mud down my gravel driveway and into the shop.

been thinking of switching to a self cleaning tire that I can still mow with? Maybe not a full out ag tire but some thing in between...

thoughts?
 
   / Tracking mud into shop....what to do? #2  
Power washer?
 
   / Tracking mud into shop....what to do? #3  
After a few hours of tilling my turf tires get packed full of clay, so I do some heavy turns in the grass to get as much off as possible then I head out to the paved road and spin them as clean as possible but I still track a ton of mud down my gravel driveway and into the shop.

been thinking of switching to a self cleaning tire that I can still mow with? Maybe not a full out ag tire but some thing in between...

thoughts?
One million dollars to you sir if you figure it out!! I have a 65 horse tractor, skid steer, mini x, and a bunch of quads. I let the mud dry till it is easy to sweep, then pile it under the leaky skid until I have a bucket full, shovel it in and dump it. Funny you mention it, but, I hate getting it in the gravel more than the shop.

If I ever win the lottery, I will bury all the clay 3 feet deep and never speak of it again.

When I complain about it, my more laid back friends tell me to wait till it is dry to fart around outside.............

Best,

ed
 
   / Tracking mud into shop....what to do?
  • Thread Starter
#4  
clay where I am is like gum sticking to the lugs - yea a pressure washer works but still needs some help with a scraper and a screw driver to clean the lugs out.
 
   / Tracking mud into shop....what to do? #5  
Look into R4 tires.
 
   / Tracking mud into shop....what to do? #6  
Git nekid before you go into the shop......oh wait.... you meant mud on the tractor not your equipment.....sorry, disregard.😊
 
   / Tracking mud into shop....what to do? #7  
I get mud stuck in my R4's too. Once it drys it leaves a trail on the floors when I drive out. Then I sweep it up. For me it's seasonal. My floors are smooth and easy to clean so less of an issue.
 
   / Tracking mud into shop....what to do? #8  
I am glad you're not cleaning your tires on roads I drive. Then I would have dirty truck to wash.
 
   / Tracking mud into shop....what to do? #9  
We are in a heavy snow zone and the plow contractor sands frequently.
Problem is that the sand he uses has a fair clay content.
Come spring all our vehicles are clay tinted and on a dry dry day you can see the dust cloud as a vehicle approaches.
During spring thaw the roads are so greasy from clay you'd believe you were driving on ice.
 
   / Tracking mud into shop....what to do? #10  
Best way I found is when your tires are packed full is to park your tractor outside of your shop in the grassy area where you won’t mind the dirt coming off. Wait till the next day or two when the mud is all dry and when you drive it will mostly all fall out. Works great.
 

Tractor & Equipment Auctions

Land Honor Quick Attach Articulating Boom Brush Cutter (A50514)
Land Honor Quick...
2008 CATERPILLAR 304C CR EXCAVATOR (A51406)
2008 CATERPILLAR...
2013 Ford F-550 4x4 Ext. Cab Auto Crane 6406H 6,000LB Crane Service Truck (A50323)
2013 Ford F-550...
Woods 7200 3 pt Finish Mower (A50514)
Woods 7200 3 pt...
Unused Delta Crash Attenuators (A49461)
Unused Delta Crash...
2015 JEEP PATRIOT (A51406)
2015 JEEP PATRIOT...
 
Top