Tool Box

[gldwing57]

I was hoping that Branson would come out with a few more accessories but not many yet

I have a 3510 I would like to put a tool box on. I am trying to find the best place that would look good on tractor and hopefully paint to match.

Anyone put tool/ storage box on theirs and if so what did you come up with.

 

[polo1665]

I just use the two toolboxes that are behind the gas tank. I know that they are not real large, but they seem to hold enough stuff for my needs.

Mark

 

[gldwing57]

I have never saw a tool box at the tank...maybe i better look better

 

[Zork]

I just use the two toolboxes that are behind the gas tank. I know that they are not real large, but they seem to hold enough stuff for my needs.

Mark

Which tool boxes are these?

 

[polo1665]

They are located just forward of the steps to the platform on each side on mine. You can't miss them. Maybe they are only on the hydro model. I'll take a couple of pics and post them tonight.

Mark

 

[polo1665]

Here's a couple of pics of the tool boxes on the 3510h. there is one of these on each side.

Mark

 

[kongs3510]

Here's a couple of pics of the tool boxes on the 3510h. there is one of these on each side.

Mark

Must just be on the H model. I have an 05 3510 and don't have those on mine. Wish I did.

 

[Zork]

Very nice! I do not have them either.

 

[jbunkley]

Here's what i did for my 3510. The tool box came Lowes, the brackets I made my self. Hope this helps.

 

[Zork]

Looks great! Thanks

 

[mas1237]

I bought an ammo box and mounted it to the left side and then painted to match. I attached it with an "L" bracket that I rebent to get the correct angle. I didn't want to mount a tool box directly behind the seat as this would block the view when connecting implements to the hitch and the SMV.

BTW the new Branson/Montana 3510 models (non-hydro) I saw at the Sunbelt Ag Expo last week come standard with a "toolbox" just forward of the left step. The size appears to be able to hold a checkbook and a pencil and not much more.

 

[ronT]

Here's a link to an old post of mine. Here's what I did. Not real heavy duty but it's still holding up.
http://www.tractorbynet.com/forums/zetor-century-branson/58295-branson-tractor-toolbox.html

 

[Ace Ford]

I bought an ammo box and mounted it to the left side and then painted to match. I attached it with an "L" bracket that I rebent to get the correct angle. I didn't want to mount a tool box directly behind the seat as this would block the view when connecting implements to the hitch and the SMV.

BTW the new Branson/Montana 3510 models (non-hydro) I saw at the Sunbelt Ag Expo last week come standard with a "toolbox" just forward of the left step. The size appears to be able to hold a checkbook and a pencil and not much more.

I was so impressed with your photos, it is now my current project! I've picked up an old ammo can and I'm gonna paint it and mount it this week.

 

[Ace Ford]

And I've finished it. Now mine looks exactly like yours. Great idea and thanks.