To fill or not to fill

   / To fill or not to fill #41  
Not really sure how I can lower the pressure. If I open up the valve stem, beat juice comes out. Ha
I'm sure it'll destroy a normal gauge.
Thx

I run 12 - 14 psi in my R1 Ag tires. Put valve stem at very top (12:00 position) push in on valve core and some fluid will come out then will start with straight air unless tire is over-filled.
 
   / To fill or not to fill
  • Thread Starter
#42  
I'm not sure what mine are set up at. The tractor is on a job right now when I get home I will check and let you know if you still want to know by then.
 
   / To fill or not to fill #43  
I'll check it again when I get back up to the farm. I had the valve stem right at 12:00, and juice was coming out. I wanted to make sure he was getting in all the juice that was possible. They are over filled. I'm going to leave them at 30, might make for a rougher ride, but it'd be a mess to bleed some out.
 
   / To fill or not to fill #44  
Try parking on a side hill, check high side tire first with valve at 12 o'clock. Turn tractor around to face the opposite direction, and check the other tire.

There will always be a bit of juice in the valve stem. If not overfilled, just a quick shot of air to clear the valve before checking pressure, makes for less mess.
 
   / To fill or not to fill #45  
Try parking on a side hill, check high side tire first with valve at 12 o'clock. Turn tractor around to face the opposite direction, and check the other tire. There will always be a bit of juice in the valve stem. If not overfilled, just a quick shot of air to clear the valve before checking pressure, makes for less mess.
Great idea. I should have known.. Park it on a hill.
Will do. I think I'll lower the pressure a bit.
Thanks!
 
   / To fill or not to fill
  • Thread Starter
#46  
Thought I would just mention this Cabelas stores that sell tractors at least the one near me is now a rim guard dealer they quoted me $230 out the door price for filling the rears of my CT 225.
 
   / To fill or not to fill #49  
I am in Center where did you you get them filled?
The company that filled them was from Palmyra Mo. Here's what I paid.
"Cost was $232. Included a $75 serv chg, and a $9 fuel chg. "

I'll try to dig up my receipt and get the name and # of the company that filled them.
 
   / To fill or not to fill #50  
Brahler's in Palmyra.
(573) 769-1041.
I have no affiliation with them at all.
I just thought they did a good job.
Jeff
 

Tractor & Equipment Auctions

2025 LandHonor LHR-DFP10 Diesel Fuel Transfer Pump with Hose Reel (A49461)
2025 LandHonor...
HUNTER SYSTEM 700 TIRE BALANCER (A50854)
HUNTER SYSTEM 700...
2015 Dodge 5500 4X4 Bucket Truck (A51039)
2015 Dodge 5500...
2019 VOLVO VHD84F300 TRI-AXLE DUMP TRUCK (A51222)
2019 VOLVO...
2014 PETERBILT 367 (A50854)
2014 PETERBILT 367...
2019 POLARIS RANGER XP PROSTAR 900 HD DOHC UTV (A51406)
2019 POLARIS...
 
Top