Timber Frame Build - Round 2

[EddieWalker]

That will look perfect behind the bar, but will people be able to stand in front of it for taking pictures?

 

[jk96]

That will look perfect behind the bar, but will people be able to stand in front of it for taking pictures?

They could walk behind the bar if they wanted to although this one is probably only 4-1/2 ft wide. It's not as big as the one I made for the house. Got a coat of poly on today. I'll do one more tomorrow than it will be ready to hang. One thing I like about the couple of flags I've made is the varying depth of the stripes. In person it really adds some character and depth to the piece.

2018-03-27_06-48-20

 

[dragoneggs]

Two more :thumbsup: :thumbsup: JK... let's see it on the wall!

 

[Kyle_in_Tex]

You are an artist too.

 

[jk96]

You are an artist too.

Thanks for the compliment. Should have the flag on the wall tomorrow. In the mean time, here's a few pics I intended to post but was just too busy. First is the trim detail on the windows. I ended up doing the same style as we did on the home build. These took me a bit longer than anticipated though since I had to build jam extensions for all of them. On the home build it was just a matter of casing the outside.

DSC_6986_7_8

Also here are a couple of pics of the new HVAC duct work above ceiling. These are the same guys who did my geothermal on the house and did another top notch job. Before the vents were direct out of the side walls. Now with all of the distribution it is quieter and much more even heating. Rectangular duct is insulated. I'll have my spray foam crew cover the uninsulated round piping.

29541397_1630765037039897_1019412375518770491_n

29570406_1630765077039893_3476356312218051478_n

 

[jk96]

Flag is up and installed a recessed light for it. I wired the light direct to power, no switch, so this one will be lit 24/7.

DSC_7009_157

DSC_7003_4_5_tonemapped

DSC_7000_1_2_fused

 

[s219]

A+, just gorgeous!

 

[EddieWalker]

Love all that space you have above your ceiling!!!! Everything is well thought out and done to perfection!!!!

 

[jk96]

I've been working anywhere from 15 -18 hour days the last two weeks here trying to wrap things up before our first official event May 5th. Just now getting to a point that I can post some updates. We are getting pretty close now. The two big items left are the groom area and stonework. I am picking up stone tomorrow in Oklahoma and sheetrock finishers are working on the groom area now.

Here's a few things we have finished up since last update.

#1 Sound & projector
Our sound install turned out great. Everything is in-ceiling including the powered subs. We have 4 different connection points. Even coverage throughout the venue with complete zone control. We have 3 zones on the vaulted ceiling area, one zone for the lower wings, a zone for patio, and one for bathrooms. We are using a soundcraft UI mixer for the zone control. It can be controlled anywhere from any web connected device which is nice. You can stand outside on the patio for instance and adjust the sound level from your phone. We painted the speakers a cream color so they blend with the ceilings. In the pic below you can see the round speaker covers but they are barely noticeable.


2018-04-22_10-28-54

2018-04-12_11-24-33

2018-04-22_10-30-13

#2 Sidewalk
Sidewalk install is complete from the venue to the wedding patio now. Turned out great. It is all colored and stamped to match the venue concrete.

2018-04-12_11-23-30

2018-04-12_11-22-11

2018-04-12_11-23-04

#3 Bridal Suite
Doors are stained and installed now. We are ready to trim out and start setting up furnature.

2018-04-22_10-29-21

2018-04-22_10-29-29

Couple of event pics

2018-04-22_10-29-59

2018-04-12_11-24-01

 

[EddieWalker]

You are going to be responsible for all your competition going out of business!!!!!