Suggestions on where to get used parts

[coloradotrout]

I need a PTO shaft for a deere 4100 cut. It sheared off just inside the case. I haven't opened the case up, so not sure if I just need a shaft and seal, or maybe more.

 

[CliffordK]

Start at Tractor House

Tractor House: JOHN DEERE Farm Equipment Dismantled Machines JOHN DEERE 4100 Less than 40 HP Tractors

We have a local dismantler here that will ship parts. But I assume they're all across the nation.

Farm Tractor Parts Online | Used Tractor Parts for Sale

Farmland Tractor brings you a huge selection of new aftermarket, used, and remanufactured farm tractor parts for sale. This is a one stop shop for all your aftermarket tractor parts. Shop now!

www.farmlandtractor.com

 

[Sportsman762]

The JD parts manuals are available online.

https://partscatalog.deere.com/jdrc/

The rear pto shaft was M807623 but has been replaced by LVU800637.
It is used on 4100, 4110, 4115 with hst transmissions.

I like to use tractorhouse to see what salvage yards

Pardon Our Interruption

Why did it break is the first question I would be asking. If it is the tractor with 600 hours in your other thread that would suggest it was not wear and tear.. If it was due to an accident or abuse I would replace the bearings as well. No matter what I would replace the seals.

 

[CliffordK]

I'm not sure I've seen a sheered PTO output, although the one on my Massey Harris is bent and will need to be dealt with sometime.

Perhaps too short of a PTO shaft and either an side force from turning, or raising and lowering the implement?

 

[coloradotrout]

Thanks for all the input. I was abusing it. Had a 4ft rotary attached and beating on big (mostly rotted) tree stumps. I don't know exactly when it snapped. 2600 hours.

Shaft, seal for certain, maybe bearings as you are suggesting. Once I pull it out, we'll see.

 

[coloradotrout]

The JD parts manuals are available online.

https://partscatalog.deere.com/jdrc/

The rear pto shaft was M807623 but has been replaced by LVU800637.
It is used on 4100, 4110, 4115 with hst transmissions.

I like to use tractorhouse to see what salvage yards

Pardon Our Interruption

Why did it break is the first question I would be asking. If it is the tractor with 600 hours in your other thread that would suggest it was not wear and tear.. If it was due to an accident or abuse I would replace the bearings as well. No matter what I would replace the seals.

Thanks! I have the parts link. Thanks for confirming I had the right numbers!

 

[Sportsman762]

Thanks for all the input. I was abusing it. Had a 4ft rotary attached and beating on big (mostly rotted) tree stumps. I don't know exactly when it snapped. 2600 hours.

Your one of the few that take ownership of their actions.

All States Ag Parts lists one online.

Used PTO Shaft fits John Deere LVU800637 M807623

PTO Shaft. Replaces John Deere OEM Number(s) LVU800637, Replaces John Deere Casting Number(s) M807623.

www.tractorpartsasap.com