VirginiaEd
Member
- Joined
- Oct 6, 2003
- Messages
- 38
I'm ready to buy a post hole digger for my Iseki TL2300. I've looked at several brands, but would like some real world experience input.
One dealer told me that most Cat 1 PHDs won't fit the Iseki lift arms and raise high enough for the auger to swing freely. I didn't get into a discussion as to why he believed that. I do have Pat's Easy Change system installed, but don't think that should make any difference.
I'll be using both 9" and 12" augers, mostly to clean out some earlier drilled holes that have filled in and to drill in some soft ground.
Any suggestions as to which brands and models might work best for my tractor would be appreciated.
Thanks,
Ed
One dealer told me that most Cat 1 PHDs won't fit the Iseki lift arms and raise high enough for the auger to swing freely. I didn't get into a discussion as to why he believed that. I do have Pat's Easy Change system installed, but don't think that should make any difference.
I'll be using both 9" and 12" augers, mostly to clean out some earlier drilled holes that have filled in and to drill in some soft ground.
Any suggestions as to which brands and models might work best for my tractor would be appreciated.
Thanks,
Ed
