Starting problem gt2544

   / Starting problem gt2544 #1  

tracyguy

New member
Joined
Apr 18, 2016
Messages
2
Location
tracy,iowa
Tractor
GT 2544
Mowed with my tractor and shut it off to clean and then would not start. Starter not turning/engaging but there is power to the starter. There's a clicking sound from under the dash coming from a relay, is this the problem?
 
   / Starting problem gt2544 #2  
Check the battery with a load tester. Look for loose wires.
Sounds like the relay is engaging just not enough power getting to the solenoid.
 
   / Starting problem gt2544
  • Thread Starter
#3  
Thanks will try that.
 
   / Starting problem gt2544 #4  
You can take a jumper cable and connect one end on the positive battery post. Touch the other end to the large starter terminal. This will bypass the ignition switch and relay and tell you if the starter works.

Bob B.
 
   / Starting problem gt2544 #5  
Update, please.

What was the cause?
 

Tractor & Equipment Auctions

JCB 190T Compact Track Loader Skid Steer (A55851)
JCB 190T Compact...
PENDING SELLER CONFIRMATION  READ BEFORE BIDDING (A57024)
PENDING SELLER...
UNUSED RAYTREE RMSC78 78" HYD SOIL CONDITIONER (A57193)
UNUSED RAYTREE...
Adams 5T High Clearance Fertilizer Spreader (A55301)
Adams 5T High...
2022 New Holland C327 Compact Track Loader (A55315)
2022 New Holland...
LANDHONOR BS-12-2500G (2) PRONG HAYSPEAR (A57193)
LANDHONOR...
 
Top