Starting problem gt2544

/ Starting problem gt2544 #1  

tracyguy

New member
Joined
Apr 18, 2016
Messages
2
Location
tracy,iowa
Tractor
GT 2544
Mowed with my tractor and shut it off to clean and then would not start. Starter not turning/engaging but there is power to the starter. There's a clicking sound from under the dash coming from a relay, is this the problem?
 
/ Starting problem gt2544 #2  
Check the battery with a load tester. Look for loose wires.
Sounds like the relay is engaging just not enough power getting to the solenoid.
 
/ Starting problem gt2544 #4  
You can take a jumper cable and connect one end on the positive battery post. Touch the other end to the large starter terminal. This will bypass the ignition switch and relay and tell you if the starter works.

Bob B.
 
/ Starting problem gt2544 #5  
Update, please.

What was the cause?
 

Marketplace Items

2023 JCB S3246E ELECTIC SCISSOR LIFT (A63276)
2023 JCB S3246E...
2001 THOMAS-INTERNATIONAL 3800 SCHOOL BUS (A64280)
2001...
2020 WESTERN STAR  4900 TRI-AXLE (A65643)
2020 WESTERN STAR...
NEW ATA-EPC40 Plasma Cutter (A62679)
NEW ATA-EPC40...
2022 FREIGHTLINER CASCADIA 6X4 T/A SLEEPER TRUCK TRACTOR (A59914)
2022 FREIGHTLINER...
2001 Volvo Sleeper (A62613)
2001 Volvo Sleeper...
 
Top