Source for "Kickout Ring" aka "Circular Cotter" ring/pin?

   / Source for "Kickout Ring" aka "Circular Cotter" ring/pin? #1  

joea99

Platinum Member
Joined
Sep 8, 2014
Messages
675
Location
Marbletown NY
Tractor
Kubota B21, JD 240GT
Looking for small quantity source for what are known as "kickout rings" a version of the circular cotter ring or pin. OD is a hair or two under 2 inches.

These are used to secure some pins on 3pt implements and I am bound to lose some one way or another. It is a lot easier to have spares on hand than to try and rig up a "it'll do for now" deal.

I've found some, but either too small or 100 minimum. There gotta be some, somewhere.
 
   / Source for "Kickout Ring" aka "Circular Cotter" ring/pin?
  • Thread Starter
#2  
Turns out Kubota has a part number for it 67156-34340. So, that settles that. Except, being as cheap as I am, I'll keep looking for substitutes.
 
   / Source for "Kickout Ring" aka "Circular Cotter" ring/pin? #3  
Check McMaster Carr. Should've a lot better prices:

 
   / Source for "Kickout Ring" aka "Circular Cotter" ring/pin?
  • Thread Starter
#4  
Check McMaster Carr. Should've a lot better prices:

Tried. A bit small.
 
   / Source for "Kickout Ring" aka "Circular Cotter" ring/pin? #5  
Looking for small quantity source for what are known as "kickout rings" a version of the circular cotter ring or pin. OD is a hair or two under 2 inches.

These are used to secure some pins on 3pt implements and I am bound to lose some one way or another. It is a lot easier to have spares on hand than to try and rig up a "it'll do for now" deal.

I've found some, but either too small or 100 minimum. There gotta be some, somewhere.
I think what you are referring to is called a lynch pin and you can find them at almost every farm store or Tractor supply etc.
 
   / Source for "Kickout Ring" aka "Circular Cotter" ring/pin? #6  





Sort of looks like they range from $2.25 to $2.75..... Bailing wire is probably only thing cheaper...
 
Last edited:
   / Source for "Kickout Ring" aka "Circular Cotter" ring/pin?
  • Thread Starter
#7  
. . .

Sort of looks like they range from $2.25 to $2.75..... Bailing wire is probably only thing cheaper...
It's the shipping that gets me. I'll just order some next time I need other parts.
 
   / Source for "Kickout Ring" aka "Circular Cotter" ring/pin? #8  
Not that I'd recommend it...

 
   / Source for "Kickout Ring" aka "Circular Cotter" ring/pin? #9  
Harbor Freight assortment in the barn and no complaints...
 
   / Source for "Kickout Ring" aka "Circular Cotter" ring/pin?
  • Thread Starter
#10  
Not that I'd recommend it...

I've got a box. Used a couple already, seem fine. I'd like them better if the pin had a flat on one side.
 

Tractor & Equipment Auctions

2015 Kenworth T400 T/A Vactor 2100 Combination Sewer Jetter Vacuum Truck (A50323)
2015 Kenworth T400...
2016 Ford Escape 4x4 SUV (A50324)
2016 Ford Escape...
2016 VOLVO VNL300 TANDEM AXLE DAY CAB (A51222)
2016 VOLVO VNL300...
2014 Volkswagen Passat Sedan (A50324)
2014 Volkswagen...
2015 JEEP PATRIOT (A51406)
2015 JEEP PATRIOT...
2008 Ford E-250 Cargo Van (A50323)
2008 Ford E-250...
 
Top