Source for "Kickout Ring" aka "Circular Cotter" ring/pin?

   / Source for "Kickout Ring" aka "Circular Cotter" ring/pin? #1  

joea99

Platinum Member
Joined
Sep 8, 2014
Messages
675
Location
Marbletown NY
Tractor
Kubota B21, JD 240GT
Looking for small quantity source for what are known as "kickout rings" a version of the circular cotter ring or pin. OD is a hair or two under 2 inches.

These are used to secure some pins on 3pt implements and I am bound to lose some one way or another. It is a lot easier to have spares on hand than to try and rig up a "it'll do for now" deal.

I've found some, but either too small or 100 minimum. There gotta be some, somewhere.
 
   / Source for "Kickout Ring" aka "Circular Cotter" ring/pin?
  • Thread Starter
#2  
Turns out Kubota has a part number for it 67156-34340. So, that settles that. Except, being as cheap as I am, I'll keep looking for substitutes.
 
   / Source for "Kickout Ring" aka "Circular Cotter" ring/pin? #3  
Check McMaster Carr. Should've a lot better prices:

 
   / Source for "Kickout Ring" aka "Circular Cotter" ring/pin?
  • Thread Starter
#4  
Check McMaster Carr. Should've a lot better prices:

Tried. A bit small.
 
   / Source for "Kickout Ring" aka "Circular Cotter" ring/pin? #5  
Looking for small quantity source for what are known as "kickout rings" a version of the circular cotter ring or pin. OD is a hair or two under 2 inches.

These are used to secure some pins on 3pt implements and I am bound to lose some one way or another. It is a lot easier to have spares on hand than to try and rig up a "it'll do for now" deal.

I've found some, but either too small or 100 minimum. There gotta be some, somewhere.
I think what you are referring to is called a lynch pin and you can find them at almost every farm store or Tractor supply etc.
 
   / Source for "Kickout Ring" aka "Circular Cotter" ring/pin? #6  





Sort of looks like they range from $2.25 to $2.75..... Bailing wire is probably only thing cheaper...
 
Last edited:
   / Source for "Kickout Ring" aka "Circular Cotter" ring/pin?
  • Thread Starter
#7  
. . .

Sort of looks like they range from $2.25 to $2.75..... Bailing wire is probably only thing cheaper...
It's the shipping that gets me. I'll just order some next time I need other parts.
 
   / Source for "Kickout Ring" aka "Circular Cotter" ring/pin? #8  
Not that I'd recommend it...

 
   / Source for "Kickout Ring" aka "Circular Cotter" ring/pin? #9  
Harbor Freight assortment in the barn and no complaints...
 
   / Source for "Kickout Ring" aka "Circular Cotter" ring/pin?
  • Thread Starter
#10  
Not that I'd recommend it...

I've got a box. Used a couple already, seem fine. I'd like them better if the pin had a flat on one side.
 

Tractor & Equipment Auctions

2022 CATERPILLAR CS44B SMOOTH DRUM ROLLER (A51242)
2022 CATERPILLAR...
2019 CATERPILLAR 289D SKID STEER (A51242)
2019 CATERPILLAR...
2017 FREIGHTLINER M2 S/A SWEEPER TRUCK (A51406)
2017 FREIGHTLINER...
2018 Dodge Charger Sedan (A50324)
2018 Dodge Charger...
2004 HYUNDAI V12530152-AJS 53FT DRY VAN TRAILER (A52141)
2004 HYUNDAI...
AGT Agrotk 680 Drop Hammer Attachment (A47384)
AGT Agrotk 680...
 
Top