Snow Attachments Snowblower Snow Skids

[Adiroundack Man]

Anybody out there know where I can purchase a pair of Snow Skids for my 5' Smyth snowblower???? Every site I look at pretty much focuses on walk behind snowblowers. Snowblower is attached to a Kubota B3030 Thanks in advance......

 

[RNeumann]

This is the first one that popped up when I did a search. I have no idea if this is a good place to purchase from but it should give you an idea of what is out there.

Fisher Snow Plow Shoe Kits & Curb Guards | Zequip Truck Parts

 

[Jchonline]

Not sure if this company makes one for a blower, but they have them for buckets.

Edge Tamer - Move Snow With Your Tractor Loader Bucket – R2 Manufacturing

 

[Adiroundack Man]

Thanks for the info, I did take a look but it's not quit what I'm looking for.

 

[Adiroundack Man]

Thanks, I checked them out and I think I'm get them for the FEL. Still gotta find something similar to that type of skid plate for the snowblower.

 

[atitus74]

I'm looking for plastic ones, so that it scratches the pavement less. I haven't pulled the trigger yet but I can tell you I'm looking at these:
https://www.sepw.com/snow-blowers/accessories/skid-shoes/


If you are looking for steel ones, try here:
Snow Blower Skids for all makes and models

 

[RjCorazza]

I looked for parts for my Canadian snow blower (LuckNow), and had a real hard time being from the lower 48. I was able to (eventually) find a US dealer who would order the hydraulic conversion parts from LuckNow. It was expensive, and a real hassle.
Anyway, the reason I am responding is that the OEM skid shoes in my case appeared under sized, so I ordered large shoes from a Beuhler dealer and just bolted them on to the side housing. Don’t necessarily rule out a simple bolt on solution that can be ordered locally.
On edit... I think it was Allied / Farm King, rather than Buhler.

 

[dannoGT]

Smyth welding and machine is still up in Aubrun Ontario and still making snow blowers the map on their Web site has shows dealer locations might try that?

 

[RoPie]

https://www.sepw.com/snow-blowers/accessories/skid-shoes/

You can try this link, but they were more expensive than buying the John Deere plastic skids from the dealer. I was looking for skids for my 54 inch Deere blower, but just ended up getting a small sheet of hdpe from eBay and making my own. Easy enough to heat and bend a piece to bolt onto the bottom of the metal skids. I think I got a 1/2 inch thick 6x8 sheet for under $10 shipped. The deere ones were $28 for each side.

 

[herm0016]

i am planing on getting a set from these guys, they have very large and adjustable skids. Make & Model Chart | Snow Blower Skids