Satoh S470D Injector Return Line size

   / Satoh S470D Injector Return Line size #1  

Steve777

Bronze Member
Joined
Dec 8, 2003
Messages
56
Does anyone know the correct size rubber return line from the injectors back to the tank?

Could just measure the old ones, but they are quite swollen and not sure I'd get the right size.

Thanks.
 
   / Satoh S470D Injector Return Line size #2  
If they're the ones I'm thinking of I just replaced mine with irrigation drip line parts. There's really no pressure on them. That tractor was a Mitsubishi D2350 if it makes a difference.
 
   / Satoh S470D Injector Return Line size #3  
It’s going to be metric (mm) so either measure the connector or take it with u to the auto parts store..
 
   / Satoh S470D Injector Return Line size #4  
If they're the ones I'm thinking of I just replaced mine with irrigation drip line parts. There's really no pressure on them. That tractor was a Mitsubishi D2350 if it makes a difference.
Measuring the fitting is a good idea, but...make sure to use fuel line otherwise the fuel will deteriorate the line over time and tiny bits of rubber will wind up in you fuel.
 
   / Satoh S470D Injector Return Line size
  • Thread Starter
#5  
Thanks. Looks like I will need to measure. Will probably get Viton fuel line, as it is more resistant to fuels and additives and might last longer.
 

Tractor & Equipment Auctions

(30) TRUSSES - 24-32" X 12'-15' (A50460)
(30) TRUSSES -...
2016 Dodge Challenger SXT Coupe (A48082)
2016 Dodge...
2016 Isuzu NPR LCF (A50397)
2016 Isuzu NPR LCF...
Ditch Witch 6510A Trencher - Deutz Diesel, Backhoe, Cable Plow, Front Blade (A50397)
Ditch Witch 6510A...
(2) New/Unused Welding Helmets (A48837)
(2) New/Unused...
2018 Peterbilt 348 T/A Pac-Mac Forestry Grapple Truck (A48081)
2018 Peterbilt 348...
 
Top