RX 75 problem

   / RX 75 problem #1  

mns

New member
Joined
Mar 8, 2009
Messages
6
Bought my Dad a RX75 that he used on a small lot a few times. Suddenly it quit moving (forward or backward). The motor, belts, and pulleys look fine. I believe something went out in the axle. Any help or suggestions would be appreciated. Is their parts available? Thanks
 
   / RX 75 problem #2  
I bought one last year for Nancy. Great little machine she runs it all over, better then a lawn tractor for mowing.
Here's the story. I got it from a guy who said the tranny was bad. Sure enough I can't move it. Pulled the back wheels and found one side had a key on the shaft missing from when someone changed a flat tire.(It must have slipped out) Put in a new key and away she went!

Rob
 
   / RX 75 problem
  • Thread Starter
#3  
I'll check it. We did put a tube in the rear before it went out. Thanks
 
   / RX 75 problem #4  
are you sure you checked all 3 belts. there are 2 traction drive belts tucked and hidden away between the frame members. not calling you stupid, most people don't realize there are 3 belts.
 
   / RX 75 problem #5  
It's easy for the pin to fall out and for you not to notice it when putting the tire back on. Also check BOTH sides.

Sometimes times the wheel is tight when you put it back on so the tranny runs fine for awhile.

best,
Rob
 
   / RX 75 problem
  • Thread Starter
#6  
It was the key in the left rear wheel. Thanks
 

Tractor & Equipment Auctions

2014 JLG G12-55A 12,000lbs 4x4 Rough Terrain Telehandler (A53421)
2014 JLG G12-55A...
2012 OVERLAN KILL TRAILER (A53843)
2012 OVERLAN KILL...
2004 TRAILKING 101" X 53' STEP DECK TRAILER (A50459)
2004 TRAILKING...
Bryant 650AN048-E A/C Unit (A52377)
Bryant 650AN048-E...
2016 Freightliner Gradall D152 Truck Mounted Excav (A53117)
2016 Freightliner...
2018 E-Z Beever M12R Towable Brush Chipper (A51691)
2018 E-Z Beever...
 
Top