Rolled it over tonight.Question?B2650

[FELMOW2320]

I loosend the top of the the injector line.Do i need to take the line completetly off the injector or loosen the injector itself
to bleed it.I've never done this before.Any help would be appreciated.

 

[kevinj]

You might want to explain what you trying to do here....

 

[FELMOW2320]

just trying to make sure it is not hydrolocked before starting.

 

[DK35vince]

Does that model have glow plugs?
Easiest might be removing the glow plugs before turning the engine over IMO.
Loosening the injector line off the injector is not to prevent hydro locking.

 

[FELMOW2320]

How do the glow plugs come out on this model.Do they just unscew after taking off the the flat piece that connects them.

 

[joecdeere]

undoing a injection line will do nothing for you, either pull the injectors or the glow plugs out, also check your fluid levels, and check for spilled acid from the battery etc

 

[s219]

Yeah, just pull the glow plugs. They should be threaded in.

 

[FELMOW2320]

Fluid levels are good.Tractor was on it's side for about 10 minutes before I could get it turned back over.I would have took pictures but was in a hurry to get turned back over and didn't have my phone with me.I'm just hoping the engine is not hurt.It kept running till i could shut it off.

 

[jdzaya]

May I ask how you put it on it's side? I'm glad you're not hurt or dead!

 

[FELMOW2320]

I was trying to taper the end of a bank that has been dug out.Got real tippy real quick and tried to back off when it rolled.Not a scratch on me and the only scratch on tractor was on a light mounted on the rops.