Rotary Cutter Rhino Rotary cutters

[whodat90]

I'm sorry to hear that. I have an SE4 that I've absolutely abused and it still works great, nothing to show for the abuse other than the odd dent where a rock stuck between the blade and the housing. Heck, I've used it as a stump grinder before, albeit on small stumps.

 

[Bill Barrett]

I bent a Wallace Auto rotary and know how, backed over a small log, as I pulled forward the tail wheel couldn't spin around as it got parallel with the log it just folded sideways . A little work in the shop press and a 5 lbs hammer, good as new!

 

[chrisjbell]

I beat the heck out of my Rhino cutter. One side has been banged by rocks thrown by the blade so many times it bulges out. I've hit the tailwheel on all kinds of stuff and the wheel rim is bent (good thing it has a solid tire on it ) but the mount is still good. That thing just rocks...

 

[shvl73]

Is this the part that is bending? (circled in attached pic)

 

[LoneCowboy]

Is this the part that is bending? (circled in attached pic)

Yes .

 

[shvl73]

$200 each is an awfully lot of $ for just the fork.

 

[LoneCowboy]

$200 each is an awfully lot of $ for just the fork.

I was incorrect
$200 is for the whole assembly (fork plus wheel)
The fork itself is $76

still a lot of money for something that should never bend.

 

[Gatorboy]

This one, I know i bent while loading it on a tilt trailer (no ramps)

Classic case of operator error.

 

[sandman2234]

I think what Gatorboy is trying to say is that ramps might have been a good investment if they will keep the tailwheels from getting bent.
David from jax

 

[LoneCowboy]

Classic case of operator error.

What are you talking about?
driving it onto a trailer should not (and has never with a bush hog) bend the entire wheel sideways.