Removing high tensile fence wire to re-use?

   / Removing high tensile fence wire to re-use? #11  
Here are some pics. I dug the thing out this morning. I used hairpins instead of 1/4" bolts as I had described earlier, getting old is tough - memory not as sharp as it used to be. The uprights are screwed to the plywood with 3" deck screws from underneath. The 4 holes in the plywood are for using tent stakes to hold it to the ground or you could screw it down to something else. A good, simple tool from scraps I had lying around.
 

Attachments

  • DSCN2735.JPG
    DSCN2735.JPG
    1.8 MB · Views: 97
  • DSCN2732.JPG
    DSCN2732.JPG
    1.5 MB · Views: 77
  • DSCN2731.JPG
    DSCN2731.JPG
    1.7 MB · Views: 84
  • DSCN2733.JPG
    DSCN2733.JPG
    1.5 MB · Views: 81
  • DSCN2734.JPG
    DSCN2734.JPG
    1.7 MB · Views: 79
   / Removing high tensile fence wire to re-use? #12  
Here are some pics. I dug the thing out this morning. I used hairpins instead of 1/4" bolts as I had described earlier, getting old is tough - memory not as sharp as it used to be. The uprights are screwed to the plywood with 3" deck screws from underneath. The 4 holes in the plywood are for using tent stakes to hold it to the ground or you could screw it down to something else. A good, simple tool from scraps I had lying around.
I think you could wind a softer wire like smooth twisted or barbed wire that tight, but it wouldn’t work for high tensile wire. Something the makes a large loop wind like a spinning Jenny is what is needed for high tensile wire.
 
   / Removing high tensile fence wire to re-use? #13  
That IS a spool of hi tensile steel wire, not aluminum wire.
 
   / Removing high tensile fence wire to re-use? #14  
That IS a spool of hi tensile steel wire, not aluminum wire.
Then I think it’s overwound. How does it spool out again after being wound so tight? All of that wire comes in large diameter coils to avoid kinking.
 
   / Removing high tensile fence wire to re-use? #15  
This Spinning Jenny is what I use. Works best with my wife helping to keep a little back tension as I wind it up. Tye wrap the bundle and store it for reuse.

Added this as it is what makes rewinding the wire easy. And goes along with the previous post I made.

 

Tractor & Equipment Auctions

2022 MAXXD BD14 Heavy-Duty Dump Trailer with 14K GVWR and Tandem Axles (A51039)
2022 MAXXD BD14...
2018 INTERNATIONAL LT625 TANDEM AXLE DAY CAB (A51219)
2018 INTERNATIONAL...
2012 STEPHENS 220BBL CRUDE OIL TRAILER (A50854)
2012 STEPHENS...
2018 Chevrolet Tahoe 4x4 SUV (A50324)
2018 Chevrolet...
2013 INTERNATIONAL PAYSTAR DAY CAB ROAD TRACTOR (A51406)
2013 INTERNATIONAL...
HUSKY 135 PSI AIR COMPRESSOR (A50854)
HUSKY 135 PSI AIR...
 
Top