Pulling a trailer with a compact tractor

[LBrown59]

I use a 6'' by 2.5 " 1/4" thick steel bar that I put a trailer ball on 1 end and drilled a hole in the other end so i can bolt it to either my BOLENS garden tractor or my Wards lawn tractor hitch to move my utility trailer around. With this gadget I don't need to use the BX 23 to move the trailer.
Only have 8 bucks in this gadget and that was for the ball!

 

[scott_in_ny]

on my bx-22 i mounted a frame class IV hitch from my old truck into my bucket.
drilled four holes and i can slip it in and out real quick. (my wife likes that).

if i need to cover the holes a piece of duct tape suffices.
i move my wood chipper,car carrier,3 small utility trailer's around all the time and did not want to bother removing the backhoe all the time.
then i can change to a pintle hitch,2",1 7/8 or whatever real quick just like on my truck.

i realize you do not have a backhoe and the weight up front may be an issue for you.
but it works out great for me just around my small 3 acres.
good luck
scott