PILOON
Super Star Member
There exists a heat cable known as 'self regulating tracing'. I've used it often to keep water lines from freezing.
Usually offered as 3 or 6 watts per foot and either 110 or 220 powered.
Only the cold areas get the heat so it is as economical as possible.
Experience has proven the 6 watt cable can actually thaw a frozen water line but the 3 watt version only prevents freezing.
Very easy to use/install, just splice the AC onto the tracing wire and good to go.
That type of cable combined with some sort of blanket would, I'm sure, be a reasonable DIY solution.
Even wrapping with standard R12 home insulation 'blanket material' would be a good start.
Also fiberglass blanket insulation, by their nature, are fireproof, but keep it dry or sheltered.
Another approach to propane service in cold zones is to install the tanks in a pit to take advantage of ground heat as frost levels are generally a known factor: in my area 4/5 ft is helpful.
Consider the goal is to keep that propane closer to 'warm enough' merely to allow vaporization.
Shucks even the eavestrough 'tracing cable' sold in many box stores would be better than nothing as a heat source (under a blanket of sorts)
Addendum:
For occasional use the addition of a programable 7 day timer might be a feasible addition.
Usually offered as 3 or 6 watts per foot and either 110 or 220 powered.
Only the cold areas get the heat so it is as economical as possible.
Experience has proven the 6 watt cable can actually thaw a frozen water line but the 3 watt version only prevents freezing.
Very easy to use/install, just splice the AC onto the tracing wire and good to go.
That type of cable combined with some sort of blanket would, I'm sure, be a reasonable DIY solution.
Even wrapping with standard R12 home insulation 'blanket material' would be a good start.
Also fiberglass blanket insulation, by their nature, are fireproof, but keep it dry or sheltered.
Another approach to propane service in cold zones is to install the tanks in a pit to take advantage of ground heat as frost levels are generally a known factor: in my area 4/5 ft is helpful.
Consider the goal is to keep that propane closer to 'warm enough' merely to allow vaporization.
Shucks even the eavestrough 'tracing cable' sold in many box stores would be better than nothing as a heat source (under a blanket of sorts)
Addendum:
For occasional use the addition of a programable 7 day timer might be a feasible addition.