Problems with my B7800

   / Problems with my B7800 #11  
The way that hole is formed, something came from inside the motor to the outside. That doesn't look good at all.

I took the time to go look at my (garaged) B3200 this evening. I believe this model is an updated version of the B7800. From what I see, I don't think the hole is as a result of an internal problem, but is as a result of the idle throttle stop portion of the casting breaking off.

Here is a picture of my (hopefully intact) throttle control plate. Not quite the same angle as my loader arm was in the way!
side of engine B3200.jpg

My tractor is off with the throttle closed, i.e. at idle. Comparing our photos, I think your idle stop has sheared off, and this could also be contributing to the engine cutting out which was your original issue.

I am not an expert in these things, but hopefully the picture comparison will help. I would think that replacing the plate may be all that is needed, although some adjustments would be needed to get the new stops adjusted correctly etc.

Hope this helps and good luck with the repair,

Stewie
 
   / Problems with my B7800 #12  
Stewie I think you are right, in fact I say by 100%.
 
   / Problems with my B7800 #14  
I got to agree with Stewie after comparing pictures.
 
   / Problems with my B7800 #15  
Excellent detective work Stewie.
 
   / Problems with my B7800
  • Thread Starter
#16  
Thank you all for the help-especially you, Stewie!! I feel alot better now. I will get that checked out very soon.
 

Tractor & Equipment Auctions

ALL ITEMS NOT PICKED UP IN 30 DAYS WILL BE RESOLD FOR STORAGE!! (A50775)
ALL ITEMS NOT...
2008 INTERNATIONAL 4300 M7 SBA 4X2 DUMP TRUCK (A51406)
2008 INTERNATIONAL...
2012 John Deere 7280R MFWD Tractor (A51039)
2012 John Deere...
RoGator 844 sprayer (A50490)
RoGator 844...
2024 CATERPILLAR 255 SKID STEER (A51242)
2024 CATERPILLAR...
2015 Ford F-550 Godwin 184U Crew Cab Mason Dump Truck (A48081)
2015 Ford F-550...
 
Top