BTI
Platinum Member
I think we need one!!!!!!! HINT HINT NUDGE NUDGE WINK WINK Know wut I mean.
BTI
BTI
Power-trac Forum
- Thread starter BTI
- Start date
- Views: 8917
s1120
Veteran Member
- Joined
- Nov 19, 2000
- Messages
- 1,716
- Location
- Columbia county NY
- Tractor
- 87 Ingersoll 444, 84 Ingersoll224/'44 GreavlyL/60'sGreavlyL/49 Ford 8N
I don't eaven own one, and I went to bat for you guys. /w3tcompact/icons/smile.gif
These are a fine tractor, I just wish I could swing one now. Or find a used one.
These are a fine tractor, I just wish I could swing one now. Or find a used one.
s1120
Veteran Member
- Joined
- Nov 19, 2000
- Messages
- 1,716
- Location
- Columbia county NY
- Tractor
- 87 Ingersoll 444, 84 Ingersoll224/'44 GreavlyL/60'sGreavlyL/49 Ford 8N
yup, same boat. Building a new house, and a baby on the way.
Harv
Elite Member
- Joined
- Aug 22, 2000
- Messages
- 3,346
- Tractor
- Kubota L2500DT Standard Transmission
I have no problem with a new forum, especially for such an interesting machine, but I only see about 8 Power Tracs in the user profiles.
I'm guessing it would be to your benefit to encourage all your Power Trac buddies to fill out their profiles so's Muhammad knows you're here.
I'm guessing it would be to your benefit to encourage all your Power Trac buddies to fill out their profiles so's Muhammad knows you're here.
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 66,423
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
Hey, there's at least 14 of us!!! /w3tcompact/icons/laugh.gif
PTRich
Gold Member
Boy Harv, I thought this was the Power Trac forum. It just had a few misplaced threads from other tractors.
PTRich
PTRich
Inspector507
Super Member
I'd vote for a PT Forum..........we got one
pajoube
Veteran Member
- Joined
- Oct 11, 2001
- Messages
- 2,225
- Location
- Montana (Near Bozeman)
- Tractor
- Former Owner PowerTrac 425 (September 2003)
We already have a PT forum.
PJ
PJ
ernemats
Veteran Member
- Joined
- Mar 29, 2002
- Messages
- 1,085
- Location
- Bolivar, pa.
- Tractor
- power trac 422, and agco-allis 5660, ,1845 power trac Greenworks CRT 426
Lets go for it!!!!!!!!!
Yes, of course we can make a Power Trac forum... would you mind if the EarthForce guys joined you? /w3tcompact/icons/wink.gif
OP
BTI
Platinum Member
How about an "Articulated Tractor" forum? That would cover them all!
BTI
BTI
glennmac
Veteran Member
I suggested long ago a Power Trac forum because it was intuitively obvious that they would be successful machines. However many Power Trac users we have here, they already generate a lot more posts than some of the forums devoted to ancient tractors, giant tractors, and other devices of marginal relevancy.
But, no, I don't think it is appropriate to include Earthforce with Power Trac. An EF is not a tractor. Well, I mean it is not a CUT substitute. A PT is a CUT substitute. An EF is more like a TLB, but I think is even less CUT-like than a TLB because it has no 3ph capability. (Does it? I must confess I haven't read the last 27,000 posts on EF enhancements; after 2 years of reading, I am still only halfway through 4310 enhancements.) What I mean is that EF is so unique that it deserves its own niche if not a forum.
Whatever. It is clearly the PT and EF purchasers and tinkerers who will lead web-based tractor consumers into the 21st century of compact dirt technology.
But, no, I don't think it is appropriate to include Earthforce with Power Trac. An EF is not a tractor. Well, I mean it is not a CUT substitute. A PT is a CUT substitute. An EF is more like a TLB, but I think is even less CUT-like than a TLB because it has no 3ph capability. (Does it? I must confess I haven't read the last 27,000 posts on EF enhancements; after 2 years of reading, I am still only halfway through 4310 enhancements.) What I mean is that EF is so unique that it deserves its own niche if not a forum.
Whatever. It is clearly the PT and EF purchasers and tinkerers who will lead web-based tractor consumers into the 21st century of compact dirt technology.
<font color=blue>How about an "Articulated Tractor" forum? That would cover them all!</font color=blue>
Yes, it would...
Yes, it would...
Charlie_Iliff
Veteran Member
- Joined
- Jun 13, 2001
- Messages
- 1,890
- Location
- Arnold, MD
- Tractor
- Power Trac PT1845, John Deere 2240, John Deere 950, John Deere 755, Jacobsen Turf Cat II
Glennmac Re: Power-trac Forum
Glennmac:
Last June, you had it figured out - concluding correctly that CUTs are designed all wrong and Power Trac is the answer. (We Power Trac Owners, of course, have been called braggarts and worse, but we'll survive.) 14 strong, we don't yet outnumber the two Earth Force owners, but we're gaining.
Recently, your posts are cause for some concern. Do you really expect a new line of tractors next fall to bear any resemblance to your personal wish list? And why anyway has that list reverted to modifications to a CUT? For your list, what you need is a Chalkley and a smoke wrench, not a Kubota.
And then I see you cheering the potential installation of a Lackender hoe on an FEL bracket. Am I to think I shouldn't have followed your analysis of the "designed all wrong" thread.
A while back, Randy Lackender welded a Power Trac plate on one of his hoes and sent it to me. I posted a picture that you may have seen:
<A target="_blank" HREF=http://www.tractorbynet.com/forumfiles/37-110466-hoe.jpg>LINK</A>
I have been repeatedly disappointed that I can't change from hoe to 4 n 1 bucket in MossRoad's target 15 seconds. Because of the hydraulic lines, it takes almost a minute.
And you are waiting for Kubota to add a what?
Glennmac:
Last June, you had it figured out - concluding correctly that CUTs are designed all wrong and Power Trac is the answer. (We Power Trac Owners, of course, have been called braggarts and worse, but we'll survive.) 14 strong, we don't yet outnumber the two Earth Force owners, but we're gaining.
Recently, your posts are cause for some concern. Do you really expect a new line of tractors next fall to bear any resemblance to your personal wish list? And why anyway has that list reverted to modifications to a CUT? For your list, what you need is a Chalkley and a smoke wrench, not a Kubota.
And then I see you cheering the potential installation of a Lackender hoe on an FEL bracket. Am I to think I shouldn't have followed your analysis of the "designed all wrong" thread.
A while back, Randy Lackender welded a Power Trac plate on one of his hoes and sent it to me. I posted a picture that you may have seen:
<A target="_blank" HREF=http://www.tractorbynet.com/forumfiles/37-110466-hoe.jpg>LINK</A>
I have been repeatedly disappointed that I can't change from hoe to 4 n 1 bucket in MossRoad's target 15 seconds. Because of the hydraulic lines, it takes almost a minute.
And you are waiting for Kubota to add a what?
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 66,423
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
Whatever you decide will be fine with me. I appreciate the time you take to listen to us. Thanks.
MJB
Gold Member
- Joined
- Jun 1, 2000
- Messages
- 499
- Location
- Syracuse, New York
- Tractor
- 1952 Case DC-4, 2001 JD4300 MFWD, HST
Technically Earthforces are not articulated. They have crab steering instead.
