Power Beyond

[cmh61271]

I have power beyond ports. Can I use these ports to plug into a bank (2) hydraulic valves? I would like to use one for my top link and one possibly for a grapple. Can someone give me a link of the valve I need? I assume I need a valve that if neither valve is selected it flows back to the tractor.

 

[kennyd]

Yes, you can plumb a valve into the PB lines...But I need to know what the rated GPM of your machine is before I can suggest a good match for you.

 

[cmh61271]

it is a 4310 deere with ehydro and 420 loader
Thanks

 

[keyman1808]

Kennyd, I am looking for the same thing but for a Kubota BX24. Where would I look for a valve for a grapple. Remotes are going to be installed soon.

Thanks
Jim

 

[kennyd]

CMH,

You know that you can add a factory remote to your machine right? Actually, you already have the valve(it's mated with the loader valve) but no way to control it. The JD kit sells for about $250 and includes everything you need...it's a nice clean setup.

 

[kennyd]

Kennyd, I am looking for the same thing but for a Kubota BX24. Where would I look for a valve for a grapple. Remotes are going to be installed soon.

Thanks
Jim

Confused

Your getting remotes installed soon? Or do you mean you are adding remotes soon and need a valve suggestion?

I am not sure the best way to do it on a BX24-there are LOTS of options. Do you want a manual valve, or a electrically operated valve?

 

[keyman1808]

I am having remotes put in so that I may use a grapple. I assume that I will need some sort of valve to control the opening and closing of the grapple itself. I may be wrong this is new to me

 

[kennyd]

I am having remotes put in so that I may use a grapple. I assume that I will need some sort of valve to control the opening and closing of the grapple itself. I may be wrong this is new to me

By definition, "remotes" include a valve to control them...The only extra's you will need is hose and QD's (quick disconnects)

 

[keyman1808]

Thanks for the clarification. Once its done I should be good to go.

 

[cmh61271]

CMH,

You know that you can add a factory remote to your machine right? Actually, you already have the valve(it's mated with the loader valve) but no way to control it. The JD kit sells for about $250 and includes everything you need...it's a nice clean setup.

How difficult is it to install?