plasma cutter

[welderboy14]

does any know the chepest place to get a plasma cutter

thanks for any replys

 

[Flatheadyoungin]

i don't know if the words cheap and plasma cutter can be used on two different websites.....let alone in the same thread! especially if you want one to cut 1/2" with.....

 

[Hooked_on_HP]

You get what you pay for.
Bill

 

[RonMar]

What Bill said, particularly with a plas...

 

[jeff_jeff]

try ebay - search for: plasma cutter - I bought one of the cheap chinese units a few years ago... works fine, cuts 3/8 no problem (slow, but no problem) cuts 1/2, but its not pretty...

just realize, you're taking a gamble... if it breaks, you're probably on your own.....

 

[Erik_in_Hoyt]

my local TSC has a Hobart that will cut 1/4" steel for $799 or one that cuts 5/8" for $1299.

 

[Scooby074]

You can get the Chincom "stuff" on ebay. Most of what ive read on them hasnt been the most flattering, but some have been happy with their purchase. Have a look on Weldingweb and see whats there.

Is there a reason you want plasma? Cheap and plasma dont go together as the others have said. You'll also need good air filtration or youll go thru consumables quickly.

A Oxy/acet torch with bottles can be bought for under $500. ~$200 for a brand name torch (Victor) and bottles for under $300. A torch will also give you a more flexable tool than a plasma. You can weld, braze, cut (thicker) and probably most important heat with a torch. Just something to think about.

 

[kayco53]

I'am fabricator that does a fair amount of stainless steel work etc and we use the plasma quite a bit.You should check the price of consumables (tips etc) when you buy a unit.If you use it a fair amount they really add up.Mind you we cut up to 1 1/2" stainless with them.Even light stuff will burn up parts not a big deal but some machines have way cheaper parts.

 

[bal0123]

Just like Scooby074 said cutting torch is by far the cheapest way to go. Although the Acetelen is somewhat high. I have used Oxy/Propane for several years and love it. It is by far the very cheapest and still with the right cutting tip, I have cut up to 1" 1/2 metal. Takes a bit longer to heat up then Acetelen, but only about 20seconds longer. No big deal. And I use the propane cylinder from my BBQ grill. Good luck

 

[kayco53]

Given a choice I would rather use a torch myself.Plasma is not the most healthy.