Corkpuller
Silver Member
VERY NICE !!
Has the appearance of a quality built structure and it just looks "neat".
Has the appearance of a quality built structure and it just looks "neat".
Planning To Build a Shop/Garage, Insulation Question
- Thread starter Milo
- Start date
- Views: 8726
OP
Milo
Platinum Member
- Joined
- Aug 7, 2006
- Messages
- 993
- Location
- Preston County, WV
- Tractor
- JD 3520, Ferris Z2100, Kawasaki Mule Pro MX, Honda Pioneer 520
Thank you Corkpuller, I couldn't be more pleased.
Still riding? Still have a Shovel?
Still riding? Still have a Shovel?
Corkpuller
Silver Member
Yep, but not nearly like I used to ride ,,,,, arthritis is trying to win this race now.
I ain’t give up yet.
I ain’t give up yet.
kawaiiitakko
New member
- Joined
- Jul 1, 2025
- Messages
- 8
- Tractor
- john deere
Hello
I am going to attempt a "mostly" self-build of a double garage. I can do a 6m x 6m single storey, with pitched roof and gable ends with no planning permission. It is unlikely this will ever hold cars, unless I build one. It is going to be a workshop/man cave and will be used a fair bit in the winter months, so I would like it to be warm and toasty.
Having had a cold concrete floor in a previous garage, I was thinking about under-floor heating powered by a wood burner, but also wondered weather I should use block walls with a cavity, or single block built around wood frames and Kingspan.
Cost is a consideration but not if it ends up being a fridge like my last garage. I will get a brickie to do the blockwork, I could do it but not in a reasonable amount of time, so I will just do the rest.
Does anyone have any thoughts? or am I missing lots of other information?
I am going to attempt a "mostly" self-build of a double garage. I can do a 6m x 6m single storey, with pitched roof and gable ends with no planning permission. It is unlikely this will ever hold cars, unless I build one. It is going to be a workshop/man cave and will be used a fair bit in the winter months, so I would like it to be warm and toasty.
Having had a cold concrete floor in a previous garage, I was thinking about under-floor heating powered by a wood burner, but also wondered weather I should use block walls with a cavity, or single block built around wood frames and Kingspan.
Cost is a consideration but not if it ends up being a fridge like my last garage. I will get a brickie to do the blockwork, I could do it but not in a reasonable amount of time, so I will just do the rest.
Does anyone have any thoughts? or am I missing lots of other information?
SethWilliams
Bronze Member
This thread is 6 years old. You would be better off making a new topic and asking your questions there.
