Oh no, my toolbox is inadequate. :(

   / Oh no, my toolbox is inadequate. :( #11  
I think tractor makers are missing an opportunity to differentiate their tractor with a nice size tool box standard.
 
   / Oh no, my toolbox is inadequate. :( #12  
The metal box is similar to what I have mounted on my tractor and it works well. Unless you’re going to leave the machine parked outside, I don’t know why being 100% waterproof is an issue. I also mounted a small ammo box next to the toolbox to function as a glovebox for small items that I don’t want to lose.

IMG_1175.jpeg
 
   / Oh no, my toolbox is inadequate. :( #13  
Not saying to abort your plans for a bigger toolbox. But I find I use my hammer and spud wrench all the time when swapping out 3 point implements.

I mounted them on the ROPS for quick access. Works well for me!
Capture.PNG
 
   / Oh no, my toolbox is inadequate. :(
  • Thread Starter
#14  
Not saying to abort your plans for a bigger toolbox. But I find I use my hammer and spud wrench all the time when swapping out 3 point implements.

I mounted them on the ROPS for quick access. Works well for me!
View attachment 3169050

That's a really neat idea; what are you using to strap them down?
 
   / Oh no, my toolbox is inadequate. :( #16  
Metal ammo box might fit your needs.
That's what I mounted30 cal) on my MF135 port side running board, did that perhaps 45 years ago and it's still as good and the day I mounted it on the tractor.
It's water and dust-tight, The downside, I had to saw 3" off the hammer handle for it to lay flat.
I got a wild hair and made my own 12"x14"x6", it too is water N dust tight; can't find a place to mount that big a toolbox. It's still collecting dust in a corner of my shop.
 
   / Oh no, my toolbox is inadequate. :( #17  
   / Oh no, my toolbox is inadequate. :( #18  
I have a very similar tractor, CK35, and that toolbox they give is too small to carry much. I'm looking at plastic, but like the ones with a tray in the lid. That lessens the choices...
 
   / Oh no, my toolbox is inadequate. :(
  • Thread Starter
#19  
I actually ended up buying the metal box, and didn't quite put together just how large it was in my mind.

Much too big for the tractor, but a nice box none the less- it carries some sockets and ratchets now.
 

Tractor & Equipment Auctions

2019 GENIE GTH-5519 TELESCOPIC FORKLIFT (A51242)
2019 GENIE...
2021 TAKEUCHI TL6R SKID STEER (A51242)
2021 TAKEUCHI TL6R...
John Deere 6410 Loader Tractor (A50514)
John Deere 6410...
2002 International 4400 SBA 4x2 Flatbed Truck (A50323)
2002 International...
Kraus Drive Over Fertilizer Conveyor (A50514)
Kraus Drive Over...
LEE G550 MOTOR GRADER (A51242)
LEE G550 MOTOR...
 
Top