New R3039 owner

   / New R3039 owner #1  

Ball Ground

New member
Joined
Sep 28, 2013
Messages
10
Location
Smyrna, GA
Tractor
LS R3039
Hello All,
I'm a new R3039 owner but did lots of research here before I pulled the trigger and purchased it. Thanks for all the wisdom, advise, comments, etc... So far I'm pretty happy with it but right off I noticed a few things. I need a toolbox and want to replace the cupholder on the right fender with a handle like what is on the left fender. I should be able to get the handle from the dealer but I don't think LS offers a toolbox. New Holland offers a toolbox and mounting plate for the Boomer 35 that I think would work but before I spent the money I wanted to check with you guys first. I would hate to reinvent the wheel if this issue has already been resolved. Thanks
 
   / New R3039 owner #2  
Congrats on the new tractor, and welcome to the forum. Someone here got a tool box from New Holland, and it was a perfect fit.
 
   / New R3039 owner #3  
I'm a very happy R3039H owner too.

I'll be watching this thread for the tool box solution. I'm a vertically challenged 5'7", so a tool box behind the fuel tank won't work. I'm straining to see the 3 pt hitch over the tank as it is!

Bob
 
   / New R3039 owner
  • Thread Starter
#4  
IMG_20140219_171654_447.jpgIMG_20140219_171709_440.jpg
Well, It took me forever to find the time but this is what I came up with for a toolbox. I'm not super happy with the actual toolbox itself but I like the location and mount. It does obstruct your visibility to the 3 point hitch just a little but no where near as bad as trying to look over your left shoulder through the slow moving vehicle sign.
 
   / New R3039 owner #5  
A box a little taller would be nice. What do you put in your box?
 
   / New R3039 owner #6  
100_0016.jpg


Congrats on the new tractor, I took off the right step and put a toolbox on.
 
   / New R3039 owner
  • Thread Starter
#10  
Murph- I agree. The toolbox was advertised as a New Holland on Amazon so I figured at least it would be the correct color. The color is close enough but the box is a little on the small side. I usually just keep a few tools, pins and a rag in it.

Bob77064- I considered ditching the step for the toolbox but I am lazy and enter the tractor on both sides so I don't have to walk around:)

Now if I can just finish up the bucket grapple project this weekend I'll be set.
 

Tractor & Equipment Auctions

2016 J&M 1122-20T X-Tended Grain Cart (A50657)
2016 J&M 1122-20T...
GORMAN RUPP 4 TRANSFER PUMP (A50854)
GORMAN RUPP 4...
2013 CAT 950K WHEEL LOADER (A50854)
2013 CAT 950K...
2019 Isuzu NPR-HD 24ft. Box Truck (A50323)
2019 Isuzu NPR-HD...
2009 Peterbilt 384 T/A Wet Kit Day Cab Truck Tactor (A50323)
2009 Peterbilt 384...
2019 Komatsu PC490LC Hydraulic Excavator (A49461)
2019 Komatsu...
 
Top