New R3039 owner

/ New R3039 owner #1  

Ball Ground

New member
Joined
Sep 28, 2013
Messages
10
Location
Smyrna, GA
Tractor
LS R3039
Hello All,
I'm a new R3039 owner but did lots of research here before I pulled the trigger and purchased it. Thanks for all the wisdom, advise, comments, etc... So far I'm pretty happy with it but right off I noticed a few things. I need a toolbox and want to replace the cupholder on the right fender with a handle like what is on the left fender. I should be able to get the handle from the dealer but I don't think LS offers a toolbox. New Holland offers a toolbox and mounting plate for the Boomer 35 that I think would work but before I spent the money I wanted to check with you guys first. I would hate to reinvent the wheel if this issue has already been resolved. Thanks
 
/ New R3039 owner #2  
Congrats on the new tractor, and welcome to the forum. Someone here got a tool box from New Holland, and it was a perfect fit.
 
/ New R3039 owner #3  
I'm a very happy R3039H owner too.

I'll be watching this thread for the tool box solution. I'm a vertically challenged 5'7", so a tool box behind the fuel tank won't work. I'm straining to see the 3 pt hitch over the tank as it is!

Bob
 
/ New R3039 owner
  • Thread Starter
#4  
IMG_20140219_171654_447.jpgIMG_20140219_171709_440.jpg
Well, It took me forever to find the time but this is what I came up with for a toolbox. I'm not super happy with the actual toolbox itself but I like the location and mount. It does obstruct your visibility to the 3 point hitch just a little but no where near as bad as trying to look over your left shoulder through the slow moving vehicle sign.
 
/ New R3039 owner #5  
A box a little taller would be nice. What do you put in your box?
 
/ New R3039 owner #6  
100_0016.jpg


Congrats on the new tractor, I took off the right step and put a toolbox on.
 
/ New R3039 owner
  • Thread Starter
#10  
Murph- I agree. The toolbox was advertised as a New Holland on Amazon so I figured at least it would be the correct color. The color is close enough but the box is a little on the small side. I usually just keep a few tools, pins and a rag in it.

Bob77064- I considered ditching the step for the toolbox but I am lazy and enter the tractor on both sides so I don't have to walk around:)

Now if I can just finish up the bucket grapple project this weekend I'll be set.
 
/ New R3039 owner #11  
The left step is a little easier to use and the toolbox is a good height.
 
/ New R3039 owner #12  
I built my own step box, here is a picture. Not the same tractor though but it could be sized accordingly.20140117_140203.jpg
 

Marketplace Items

2005 Airman PDS185S Towable Air Compressor (A64194)
2005 Airman...
JCB 3TS-8T TELESKID SKID STEER (A65053)
JCB 3TS-8T...
2018 Caterpillar 287D Two Speed Compact Track Loader Skid Steer (A64553)
2018 Caterpillar...
NEW HOLLAND PULL TYPE ROLL BAR HAY RAKE (A64278)
NEW HOLLAND PULL...
2021 Chevrolet Silverado 2500 HD Royal Service Truck (A64194)
2021 Chevrolet...
LAND PRIDE 10' HYD 6 WAY BLADE (A64278)
LAND PRIDE 10' HYD...
 
Top