New Grapple, new tractor guy

[k0ua]

Ok so now we have some pics, name that connection:View attachment 347377

1/2 inch NPT.. All you need is a male and female AG connector.. will screw right on. Good to go.

 

[94BULLITT]

1/2 inch NPT.. All you need is a male and female AG connector.. will screw right on. Good to go.

and they are available at TSC.

 

[adventure bob]

So I went to bug r and they do have them on the shelf, but heres my confusion: The ones on the shelf have no means to engage the bevel inside the ones on my connectors. Does that matter? Will they still seal? I read the doc posted in this thread about determining connector type. According to that doc, the connector would have a beveled portion inside the female to engage the interior bevel in the male.

 

[k0ua]

So I went to bug r and they do have them on thne shelf, but heres my confusion: The ones on the shelf have no means to engage the bevel inside the ones on my connectors. Does that matter? Will they still seal? I read the doc posted in this thread about determining connector type. According to that doc, the connector would have a beveled portion inside the female to engage the interior bevel in the male.

Negative , the NPT seal on the tapered threads not a bevel. Doc was referring to JIC with the 37degree bevel seal. Note how your threads have a taper.