Need John Deere top link dimension...

/ Need John Deere top link dimension... #1  

mbu

Silver Member
Joined
Jun 1, 2008
Messages
123
Location
Colorado
Tractor
.
If you have a John Deere Category 2 top link similar to the one shown in the attached photo (part # AR34209) would you mind obtaining a measurement for me?

I need to know the minimum and max distance it will screw to.

Thank you for your help!

Mike
 

Attachments

  • John Deere top link hook CAT 2.jpg
    John Deere top link hook CAT 2.jpg
    14.5 KB · Views: 253
/ Need John Deere top link dimension... #2  
I have a JD 5525 with cat two but it does not look like this one. Willing to measure for you if it would help. It is not being used right now so would be easy. It maybe the model of tractor is more important than the design of the third arm is.
 
/ Need John Deere top link dimension...
  • Thread Starter
#3  
kthompson,

Thank you!

The photo in my post is the best one I could find that looks similar to the JD's. If yours has a hook on one end (like in my first post photo) and a knuckle on the other (like in the attached photo below) that'll be the one I'm looking for. If you have time, I'd sure appreciate the dimensions of when it's screwed tight and when it's screwed open. I believe, the John Deere part number is AR34209.
 

Attachments

  • John Deere Top Link Knuckle.jpg
    John Deere Top Link Knuckle.jpg
    7.9 KB · Views: 144
Last edited:
/ Need John Deere top link dimension... #4  
If you have a John Deere Category 2 top link similar to the one shown in the attached photo (part # AR34209) would you mind obtaining a measurement for me?

I need to know the minimum and max distance it will screw to.

Thank you for your help!

Mike

Top Link Assembly

John Deere - Fits: 520, 530, 620, 630, 720, 730

Replaces: AF2799R, AR21917R, AF2873R, AF2798R


This John Deere top link includes the hood on the end and the chain. Adjustable from 21-1/2" to 30". Uses a 0.750" diameter pin in one end and a 2" diameter ball in the hook end.

You can buy one from here...:)
John Deere Tractor Hitch Top Links and Replacement Parts
 
/ Need John Deere top link dimension...
  • Thread Starter
#5  
Top Link Assembly

John Deere - Fits: 520, 530, 620, 630, 720, 730

Replaces: AF2799R, AR21917R, AF2873R, AF2798R


This John Deere top link includes the hood on the end and the chain. Adjustable from 21-1/2" to 30". Uses a 0.750" diameter pin in one end and a 2" diameter ball in the hook end.

You can buy one from here...:)
John Deere Tractor Hitch Top Links and Replacement Parts

Thank you for the link! That is the information I needed.
 

Marketplace Items

2019 Cadillac Sayers and Scovill 70IN Limo w Only 7729 Miles (A63689)
2019 Cadillac...
1999 22ft Sea Ray Boat w/ 2015 23ft Shorelander T/A Boat Trailer (A64557)
1999 22ft Sea Ray...
2021 CATERPILLAR 289D3 SKID STEER (A65053)
2021 CATERPILLAR...
2025 Auger Drill Bit Skid Steer Attachment (A64553)
2025 Auger Drill...
2019 Ford F-550 Altec AT248F 43ft. Bucket Truck (A64556)
2019 Ford F-550...
2026 DEVELON DX27Z-7 EXCAVATOR (A64279)
2026 DEVELON...
 
Top