Need help with 1967 Ford 3000

   / Need help with 1967 Ford 3000 #1  

big george

New member
Joined
May 26, 2017
Messages
7
Location
Fulton md
Tractor
Ford 1967 3000
How do you replace the filter in the power steering pump? There is a spring inside that is making it difficult to reattach.
 
   / Need help with 1967 Ford 3000 #2  
I remember it being a little tricky to replace the reservoir cover as well due to the spring when I changed the filter and fluid on my 4100. If i recall it took me and another person, one to hold the reservoir cover and the other was applying pressure on the bolt and turning it simultaneously with a battery impact. Be careful that you don't strip the threads if you use a battery or pneumatic gun.
 
   / Need help with 1967 Ford 3000
  • Thread Starter
#3  
I don't have help and I do not have a battery impact just Old fashion wrenches .
 
   / Need help with 1967 Ford 3000 #4  
It was impossible for me to get everything lined up, so I removed the power steering pump and reassembled it off of the tractor. Only two bolts hold the pump on from the front. Don't forget the pump to engine o-ring if you go this route. This is only for the pump with integral reservoir, which maybe didn't start until '68.
 
Last edited:

Tractor & Equipment Auctions

2020 Kubota Z723KH 48in. Zero Turn Commercial Mower (A50322)
2020 Kubota Z723KH...
IMPORTANT PLEASE READ!!!! TERMS AND CONDITIONS (A51573)
IMPORTANT PLEASE...
2004 Sterling L8500 4,000 Gallon T/A Water Truck (A50323)
2004 Sterling...
Kawasaki NR (A50324)
Kawasaki NR (A50324)
2007 Amkus Rescue System (A50322)
2007 Amkus Rescue...
STORAGE FEES (A52576)
STORAGE FEES (A52576)
 
Top