Need help with 1967 Ford 3000

   / Need help with 1967 Ford 3000 #1  

big george

New member
Joined
May 26, 2017
Messages
7
Location
Fulton md
Tractor
Ford 1967 3000
How do you replace the filter in the power steering pump? There is a spring inside that is making it difficult to reattach.
 
   / Need help with 1967 Ford 3000 #2  
I remember it being a little tricky to replace the reservoir cover as well due to the spring when I changed the filter and fluid on my 4100. If i recall it took me and another person, one to hold the reservoir cover and the other was applying pressure on the bolt and turning it simultaneously with a battery impact. Be careful that you don't strip the threads if you use a battery or pneumatic gun.
 
   / Need help with 1967 Ford 3000
  • Thread Starter
#3  
I don't have help and I do not have a battery impact just Old fashion wrenches .
 
   / Need help with 1967 Ford 3000 #4  
It was impossible for me to get everything lined up, so I removed the power steering pump and reassembled it off of the tractor. Only two bolts hold the pump on from the front. Don't forget the pump to engine o-ring if you go this route. This is only for the pump with integral reservoir, which maybe didn't start until '68.
 
Last edited:

Tractor & Equipment Auctions

2004 Mercedes Benz E-Class Sedan (A50324)
2004 Mercedes Benz...
2025 Swict 84in Bucket Skid Steer Attachment (A50322)
2025 Swict 84in...
2004 IH 5600l Snow Plow Truck (A52384)
2004 IH 5600l Snow...
2018 Toyota RAV4 Hybrid XLE AWD SUV (A50324)
2018 Toyota RAV4...
Skid Steer Plate Attachment (A50322)
Skid Steer Plate...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
 
Top