MT373D

[wiskey]

Fiancee & I just bought a Satoh/Mitsubishi and quite happy with it. It came with a front end loader, gannon and disc. Thanks to this group, I was informed to check the rear PTO for clockwise rotation and being a 6 point instesd of 18 point drive. I need manuals and seat for it. thanks to bill at Satohparts.com the manuals and seat are on the way. Thanks Bill
I'm going to be looking for a mower soon, can anybody recomend a good one for the MT373D?

 

[oliver28472]

I have the grey version of yours and use a well worn 48" Woods rear mount. I tried a 60" Bush Hog rear discharge for a few days. The mower did a better mowing job but was way too heavy for the tractor and sat further behind the tractor than the Woods. This resulted in: more turning clearance needed cause I was mowing things that weren't supposed to be mowed; also the weight and size of the mower would tend to fishtail the tractor. The Woods is not perfect but is more suited to this tractor than anything else I have seen. Instead of dolly wheels on each corner of the deck, the front is supported by stay chains hooked to the top link bracket on the tractor. This allows the mower to be placed closer to the tractor. I hope you were asking about finish mowers

 

[plowboy952]

I have a 54" mid mount deck with electric clutch that came off a satoh buck. I use a ford 60" rear mount finishing mower. Does not tie my tractor up if I need to use it for something else.