MT225s Backhoe Seat Question

   / MT225s Backhoe Seat Question #1  

wraven

Member
Joined
Mar 5, 2020
Messages
44
Location
South Central Pennsylvania
Tractor
LS MT225S and a Huskee that identifies as a CASE Magnum 240
Would someone please check their rotating seat and tell me how close they can adjust the seat to the BH controls?

I can’t get it close enough and wind up sitting on the edge of the seat to operate the hoe. It was installed at the dealer but I don’t see an obvious issue. My picture shows it all the way back. IMG_1607.JPG
 
   / MT225s Backhoe Seat Question #2  
My neighbor was complaining about the same thing. He is 6'5" and has a hard time reaching for the BH levers. We made an adjustment to the levers : (remove the cover at the base of the levers, loosen the nuts at the base of the levers, and turn them about a 1/4 to 1/3 turn back towards the seat, tighten nuts).

It did make a difference, but still far away. We looked at the base plate the seat tracks are mounted to. There is plenty of space left to drill new mounting holes about 1 1/2" further towards the rear. We are probably going to drill and remount the seat this weekend. Even with it mounted further back, it will slide forward enough for normal operation of the tractor.
 
   / MT225s Backhoe Seat Question
  • Thread Starter
#3  
I’m a newbie and I have this question double posted because I accidentally posted in “buying” instead of “owning.”

How can I delete this thread?
 

Tractor & Equipment Auctions

2025 K1912 UNUSED Metal Livestock Shed (A50860)
2025 K1912 UNUSED...
2025 K0311 UNUSED Galvalume Corrugated Steel Panel (A50860)
2025 K0311 UNUSED...
1997 Mercedes-Benz SL500 Convertible (A48082)
1997 Mercedes-Benz...
2012 Big Tex 14GP-24 Gooseneck Trailer (A50860)
2012 Big Tex...
1993 Ford F-350 4WD Ambulance Truck (A50860)
1993 Ford F-350...
2012 Bomag BC572 Refuse Compactor (A49346)
2012 Bomag BC572...
 
Top