I agree. the M 1/2" Fuel is heavy. but it does the job my Ryobi 1/2 18vt won't. I only use it when my ryobi sticks it's finger out at me. like the 5/8" Shank bolts with 15/16 heads that hold the blades on to my woods 60" deck and their left handed
This is my most used impact outside of the 1/4' impact driver.. The thing is real smooth and a beast for its size.I'm the OP and that's my original post in wanting to buy a 1/2" drive 18V impact gun for basic farm, auto and tractor work.
After all the very helpful comments and because I had Makita things already, I wound up with the 3/8" Makita 18V and it's perfect for me. I mail ordered from Home Depot after Amazon sent me an open box return I didn't want.
Makita USA - Product Details -XWT16Z
18V LXT® Lithium-Ion Brushless Cordless 4-Speed 3/8" Sq. Drive Impact Wrench w/ Friction Ring Anvil, Tool Onlywww.makitatools.com
It's lightweight, shockingly powerful and easy on the battery. Just for chuckles I tried on my 150 ft lb Tundra wheels and it zipped them off. no problem. It has multiple power settings so I use the lightest when putting nuts back on and now I can easily hold the difficult "hubcap" in place while installing.
1/2" impact would have been too much for my use. Sure, for tough stuff I would need it and if I still had big equipment it would be a universal tool for all of that and everything else. For that I have a 1000 ft lb air gun so that's my backup. FYI
Do you have a magnetic socket for the 1/4" hex bits yet?I'm the OP and that's my original post in wanting to buy a 1/2" drive 18V impact gun for basic farm, auto and tractor work.
After all the very helpful comments and because I had Makita things already, I wound up with the 3/8" Makita 18V and it's perfect for me. I mail ordered from Home Depot after Amazon sent me an open box return I didn't want.
Makita USA - Product Details -XWT16Z
18V LXT® Lithium-Ion Brushless Cordless 4-Speed 3/8" Sq. Drive Impact Wrench w/ Friction Ring Anvil, Tool Only
It's lightweight, shockingly powerful and easy on the battery. Just for chuckles I tried on my 150 ft lb Tundra wheels and it zipped them off. no problem. It has multiple power settings so I use the lightest when putting nuts back on and now I can easily hold the difficult "hubcap" in place while installing.
1/2" impact would have been too much for my use. Sure, for tough stuff I would need it and if I still had big equipment it would be a universal tool for all of that and everything else. For that I have a 1000 ft lb air gun so that's my backup. FYI
those are good. I have a metric & sae 1/4 dr set I bought 25 yrs ago before I retired as a auto tech. these are the sunnex and work really well & warranted for life, never broke one. they were $68 back then, I have no idea now. I also have the makita 12vt drill & flashlite kit from 20 yrs ago, & ryobi 18vt flashlite,drill & 1/2 impact I still use a lot. I only break out the heavy Milwaukee 18vt impact when the job is too hard for the Ryobi
Yes, I have a magnetic socket but is not impact rated or anything like that.
I'm the OP on this thread and let me thank everyone for helping and convincing me to buy a 3/8" battery impact gun for farm and shop use. As mentioned, I went with Makita because I already had batteries and chargers but I suspect most brands are as powerful. I see a lot of Milwaukee and DeWalt around.I'm the OP and that's my original post in wanting to buy a 1/2" drive 18V impact gun for basic farm, auto and tractor work.
After all the very helpful comments and because I had Makita things already, I wound up with the 3/8" Makita 18V and it's perfect for me. I mail ordered from Home Depot after Amazon sent me an open box return I didn't want.
Makita USA - Product Details -XWT16Z
18V LXT® Lithium-Ion Brushless Cordless 4-Speed 3/8" Sq. Drive Impact Wrench w/ Friction Ring Anvil, Tool Only
It's lightweight, shockingly powerful and easy on the battery. Just for chuckles I tried on my 150 ft lb Tundra wheels and it zipped them off. no problem. It has multiple power settings so I use the lightest when putting nuts back on and now I can easily hold the difficult "hubcap" in place while installing.
1/2" impact would have been too much for my use. Sure, for tough stuff I would need it and if I still had big equipment it would be a universal tool for all of that and everything else. For that I have a 1000 ft lb air gun so that's my backup. FYI
The link you have is the tool only currently, but here is the link for two XC6.0 5.0Ah batteries and charger
I've been buying Tools at Home Depot and Lowes lately. I get better quality, they have everything, it's priced honest, I can return it no questions and they'll bring it to my door, generally for free. And I spend zero on gas.The link you have is the tool only currently, but here is the link for two XC6.0 5.0Ah batteries and charger
Milwaukee M18 FUEL Gen-2 18V Lithium-Ion Brushless Cordless Mid Torque 1/2 in. Impact Wrench with (2) 6.0Ah Batteries and Charger 2962-20-48-59-1862S - The Home Depot
Complete all your fixing jobs by choosing this Milwaukee M18 FUEL Gen-2 Lithium-Ion Brushless Cordless Mid Torque Impact Wrench with Friction Ring.www.homedepot.com