MEASUREMENT NEEDED. HELP!

[dirtworksequip]

I was hoping that someone could make a quick measurement on there 3X20 tractor for me. I am trying to determine if the rock shaft is bent. The measurement I need is from the inside of the left rock shaft to the inside of the right rock shaft. That is shaft to shaft just above the bolts. The pic below shows where I need the measurement. Sorry, its not real clear. Any help would be appreciated. Thanks!

Sincerely, Dirt

 

[B8FISH]

11" on a 3320

 

[dirtworksequip]

Thanks FISH, thats what I have on the 3520. 11 inches. I just wanted to check with someone to give me an idea if mine was ok or not. Thanks again for checking.

Sincerely, Dirt