Maxing out drawbar capacity

/ Maxing out drawbar capacity #1  

pretendfarmer

Gold Member
Joined
Jul 15, 2013
Messages
253
Location
WA
Tractor
John Deere 790
My JD 790 rates the max drawbar hitch weight at 675 lbs. I want to move a small travel trailer around a flat driveway but am unable to weigh the tongue. From everything I can find, the travel trailer tongue weight should be between 600 and 700 pounds per the manufacturer. Is there some leeway built into the drawbar ratings?
 
/ Maxing out drawbar capacity #2  
You won't break the drawbar hitch, but the front end may get light. That you will find out when you hook up to the trailer.

Just be prepared to either add weight to the trailer behind the axles, or to add weight to the front end of the JD 790.

A bit of trial and error. But think it should go well for you.

Let us know..
 
/ Maxing out drawbar capacity #3  
I'm sure you will be fine, but as mentioned, be careful with the front end getting light.
If you want to measure your tongue weight, there are methods using a regular bathroom scale and a lever. I use a small hydraulic scale just for my trailers to ensure I get the tongue weight correct when loaded.
 
/ Maxing out drawbar capacity #4  
Often the height and length of the drawbar are limiting factors.
Your rear tires will get close to the trailer and a frame on turns.
 

Marketplace Items

Coats 5060AX Rim Clamp (A63689)
Coats 5060AX Rim...
Farmall Cub Tractor (A62613)
Farmall Cub...
2021 Case TV450B (A64126)
2021 Case TV450B...
Frontier Forks (A64127)
Frontier Forks...
2007 Sterling L7500 Terex Commander C6060 T/A Insulated Derrick Digger Truck (A60460)
2007 Sterling...
2008 STOUGHTON ZGPVW-535T-SC-AR 53X102 T/A DRY VAN TRAILER (A59914)
2008 STOUGHTON...
 
Top