massey ferguson help

[Garbear34]

I just bought a massey ferguson tractor to use on our place. The tractor runs great but need to find me a owners and parts manuel for her.

Here is what I can find on my tractor. On the side of the tractor says Massey ferguson 65. On my loader frame says 200. There is a plate on teh loader frame says model 200 and model number 566? for a serial number.
I am hoping to find me a bottom plow and disk for it.

Here is a pic of the tractor Any help would be greatly apreciated.

Garbear

 

[MIKE R]

Hope you are having fun with the tractor. From the photo it looks you are correct on the model. The serial plate is located around the right side of the instrument panel. Your tractor looks to be painted like a industrial version with the yellow paint. But I don't think Massey ever produced a 65 Industrial.
I don't have any info on the loader but somebody else on here will know.

 

[Jerry/MT]

I just bought a massey ferguson tractor to use on our place. The tractor runs great but need to find me a owners and parts manuel for her.

Here is what I can find on my tractor. On the side of the tractor says Massey ferguson 65. On my loader frame says 200. There is a plate on teh loader frame says model 200 and model number 566? for a serial number.
I am hoping to find me a bottom plow and disk for it.

Here is a pic of the tractor Any help would be greatly apreciated.

Garbear

There are probably several sources for the manuals you are looking for. Try an Agco dealer, look on ebay, google on "massey ferguson 65 manuals" or try Tractor and Equipment Repair Manuals and More - Jensales.

 

[bsbrum]

I just bought a massey ferguson tractor to use on our place. The tractor runs great but need to find me a owners and parts manuel for her.

Here is what I can find on my tractor. On the side of the tractor says Massey ferguson 65. On my loader frame says 200. There is a plate on teh loader frame says model 200 and model number 566? for a serial number.
I am hoping to find me a bottom plow and disk for it.

Here is a pic of the tractor Any help would be greatly apreciated.

Garbear

I am looking at getting a MF65 Industrial, it has a Perkins gas engine. Is yours gas or diesel?

I have looked for details on the Industrials and manuals seem to be as scarce as hens teeth. If you find anything specific to them please post some info, it would be a big help. I'll do the same.

Cheers!

 

[TXMF135]

I used ytmag.com for my operators, service, and parts manuals. I also sent them lots of money for engine parts.

 

[bsbrum]

I used ytmag.com for my operators, service, and parts manuals. I also sent them lots of money for engine parts.

Hmmmm... I don't see mention of any of their stock being for the "Ind" specifically like the other Industrial models. I did see the loader manuals.

I have a MF65 service manual but it only covers the AG/Util/HC models, and doesn't mention the Perkins gas engine, which has some unique features not in the non-industrial, like the engine mounts - where the Conti G176's case has flanges cast on the block to bolt up with the front end, the Perkins does not, it bolts up to an adapter.

Again, hmmmmm.

 

[Garbear34]

I have not found a manuel yet. The engine is gas. I stopped by the local auto parts store. They had info as far as gas filter, oil. They didn't have air filter. I am sure if I bring in the old filter they can or have it in stock. The farmers out here of thier accounts there. We have a local Massey ealer but when ever I am off they are closed. I am hoping once I go back to my regular schedule I"ll be able to get in there and see if they can find me a owners and shop manuel. If I find one I'll let you know.
Garbear

 

[bsbrum]

If I find one I'll let you know.
Garbear

Good luck, and thanks, hopefully we can unearth something.

 

[pete59]

Hi, there should be an ID. plate on the dash to left of steering wheel.

 

[bsbrum]

I have not found a manuel yet. The engine is gas. I stopped by the local auto parts store. They had info as far as gas filter, oil. They didn't have air filter. I am sure if I bring in the old filter they can or have it in stock. The farmers out here of thier accounts there. We have a local Massey ealer but when ever I am off they are closed. I am hoping once I go back to my regular schedule I"ll be able to get in there and see if they can find me a owners and shop manuel. If I find one I'll let you know.
Garbear

Garbear - looky at what I found over at Agco!


http://www.agcopubs.com/operator_manual/english/690614m1/65_utility_tractor

The description says "Massey Ferguson Tractors-Industrial 65 Utility Tractor Operator Manual" so - is this the right Operator Manual?

If so, is this then the right maintenance manual? AGCO Technical Publications: Massey Ferguson Tractors-Agricultural - Wheeled, Tractors-Industrial 65, 65 Utility Tractor Service Manual, includes storage binder

Description says 'Massey Ferguson Tractors-Agricultural - Wheeled, Tractors-Industrial 65, 65 Utility Tractor Service Manual, includes storage binder"